Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley MPL Servo Motors MPL-A540K-MK24AA

Product image is representative; revision or series may vary. Contact us to request a specific version.

MPL-A540K-MK24AA

|
Need a Specific Revision?

The Allen-Bradley MPL-A540K-MK24AA servo motor is an MPL series servo motor. It weighs 33 pounds. The input voltage rating of the MPL-A540K-MK24AA servo motor is 200 Volts AC.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for MPL-A540K-MK24AA

ManufacturerAllen Bradley
Product TypeServo Motor
Product LineMPL Servo Motors
Part NumberMPL-A540K-MK24AA
Weight20.00 lbs (9.07 kg)
MountingFlange Mounting
Protection RatingIP 50
Rated Rotor Speed4000 RPM
Maximum Rotor Speed4000 RPM
Voltage Rating200 Volts AC
Holding BrakeYes
Frame Size165 millimeters
EncoderYes
Request a Repair

The MPL-A540K-MK24AA servo motor is a Kinetix MPL series low-inertia servo motor from Allen-Bradley. The rated rotor speed is 4000 RPM, the maximum rotor speed is 4000 RPM, the continuous torque rating is 172 pounds on an inch, the peak torque rating is 430 pounds on an inch, and the motor output power rating is 5.5 kilowatts. The weight of the MPL-A540K-MK24AA servo motor is 33 pounds. The input of the servo motor is compatible with a 200 Volts AC rated mains supply. The specifications for the integrated 24 Volts DC holding brake include 25 arc minutes of backlash, 250 pounds on an inch of holding torque, 1.05 to 1.28 Amps of coil current, 70 milliseconds of release time, and 50.1 pounds of weight. The frame size of the MPL-A540K-MK24AA servo motor is 165 millimeters. The magnet stack length of the servo motor is 4 inches. This servo motor provides feedback from an integrated multi-turn encoder.

The IEC metric flange on the Allen-Bradley MPL-A540K-MK24AA MPL series servo motor features free mounting holes. The protection ratings for the MPL-A540K-MK24AA servo motor when it is mounted with the shaft pointed upwards, horizontally, or downwards are IP 50, IP 51, and IP 53, respectively. The shaft on the MPL-A540K-MK24AA servo motor comes without a shaft key and without a shaft seal. If an optional seal kit is installed on the servo motor, and if environmentally sealed connectors are used, then the protection rating of the motor is IP 66. The motor connector is a bayonet connector that faces the shaft. The MPL-A540K-MK24AA servo motor should not be handled or lifted by the motor shaft because doing so can cause the cap on the shaft to come loose and the operator may drop the motor. The motor should only be powered up after it has been installed.