Product image is representative; revision or series may vary. Contact us to request a specific version.
MPL-A540K-MK72AA
This Rockwell Automation 4000 RPM MPL servo is a 165 mm frame size. This motor is powered on with 200 volt, doesn't have braking built into the low inertia motor, and doesn't have a no shaft key and no shaft seal built in. This MP low inertia smart motor also features a multi-turn absolute encoder. This low rotor inertia synchronous servo additionally comes with circular DIN (right angle) connectors which are pre-installed on this servo. This low rotor inertia servo motor has a stack length of 4 in.
-
We sell industrial automation parts backed by our free 2-Year DO Supply Warranty.
-
Same-day domestic and fast international shipping with UPS, FedEx, DHL, and more.
-
AMEX, Visa, MasterCard, Discover, wire transfer, net terms, and more.
-
Repairs and exchanges are available for all automation products.
- Reseller Options
Drop shipping, blind shipping, and account shipping with no extra fees.
Technical specifications for MPL-A540K-MK72AA
| Manufacturer | Allen Bradley |
|---|---|
| Category | Motors |
| Product Line | MPL Servo Motors |
| Part Number | MPL-A540K-MK72AA |
| Weight | 20.00 lbs (9.07 kg) |
| Series | Premium permanent magnet rotary servo motor |
| Series Type | Low-inertia |
| Voltage Class | 200 Volts AC |
| Frame Size | 165 millimeters |
| Magnetic Stack Length | 4 inches |
| Rated Speed | 4000 rpm |
| Feedback | Multi-turn high-resolution encoder |
| Shaft Key/Seal | No shaft key/no shaft seal |
| Connectors | Circular DIN, right angle, 180 degrees rotatable |
| Brake | No brake |
| Mounting Flange | IEC metric |
| Factory Designated Options | Standard |
The MPL-A540K-MK72AA servo motor is a servo motor from Allen-Bradley that is rated at 4000 rpm. It is part of the MPL series of synchronous AC motors and it operates at 200 Volts AC input. The magnet stack length for the MPL-A540K-MK72AA servo motor is 101.6 millimeters and the frame length is 165 millimeters. The maximum motor speed is 4000 rpm and the output power rating is 5.5 kilowatts. The specifications for the continuous and peak stall torque are 19.4 N-m and 48.6 N-m while the rotor inertia is 0.00147 kg-m2. The approximate weight of the MPL-A540K-MK72AA servo motor is 15 kilograms.
The MPL-A540K-MK72AA servo motor comes without a brake, a shaft key, or a shaft seal. Allen-Bradley provides optional kits for both the motor brake and the shaft seal. The shaft seal is made from nitrile and seal kits come with lubricant to reduce wear. The purpose of the shaft seal is to protect the bearings on the MPL-A540K-MK72AA servo motor from contaminants such as dust and moisture. Because the shaft seals degrade with use, periodic inspection is highly recommended. Furthermore, the shaft seals should be replaced after about 3 months of use. Replacements should not be more than 12 months apart. The MPL-A540K-MK72AA servo motor includes a circular DIN connector, a 1024 sin/cos absolute multi-turn encoder for feedback, and a standard IEC metric flange (with type FF holes). The operating temperature range for the motor is from 32 to 104 degrees Fahrenheit. The non-condensing relative humidity around the motor should be maintained between 5 and 95%. The cables used with the servo motor should be restrained to prevent tension and flexing at the cable connections.
| Revision Part # | Also known as | |
|---|---|---|
| MPL-A540K-MK72AA Ser A | MPL-A540K-MK72AA/A, Series A, Rev A | |
| Don't see your particular revision? Contact us now. | ||
- MPL-A54OK-MK72AA
- MPL-A5A0K-MK72AA
- MPL-A5AOK-MK72AA
- MPLA540KMK72AA
- MPLA54OKMK72AA
- MPLA5A0KMK72AA
- MPLA5AOKMK72AA
This Premium permanent magnet rotary servo motor (Low inertia) includes a 200V, 165 mm frame size, with a magnetic stack length of 4 in., a rated speed of 4000 rpm, a Multi-turn high-resolution encoder feedback, No shaft key/no shaft seal, Circular DIN, right angle, 180 degrees rotatable, No brake, IEC metric, and Standard designated options.