MPL-A540K-MK74AA

The Allen-Bradley MPL-A540K-MK74AA servo motor is a synchronous servo motor. It is part of the Kinetix MPL series. The MPL series servo motors are UL recognized and CE certified. The MPL-A540K-MK74AA servo motor comes with a high performance 1024 sin/cos multi-turn encoder with 21-bit resolution. The multi-turn encoder provides feedback within 4096 turns. The electromechanical encoder does not require a battery. The MPL-A540K-MK74AA servo motor is equipped with a 180 degrees rotatable circular DIN connector. The rated rotor speed and maximum rotor speed of the MPL-A540K-MK74AA servo motor are both 4000 RPM. The motor produces 19.4 N-m of continuous torque. The peak torque output of the motor is 48.6 N-m. The power output rating of the servo motor is 5.5 kilowatts. The installation and operation of MPL series servo motors and connected drives should only be carried out by trained technicians.

The Allen-Bradley MPL-A540K-MK74AA MPL series synchronous servo motor is a motor with low inertia. The input voltage rating of the motor is 200 Volts AC. The frame size of the servo motor is 165 millimeters. The motor shaft does not have a shaft key. The steps required to install a shaft key include verification that the key being used matches the shaft keyway and the alignment of the front of the key with the front of the motor shaft. The motor shaft also does not include a shaft seal but Allen-Bradley provides an optional seal kit for MPL motors. Other motor features include a 24 Volts DC holding brake and an IEC mounting flange with free mounting holes. The protection rating of the MPL-A540K-MK74AA servo motor depends on its mounting orientation: the minimum protection rating is IP 50 for when the motor is mounted with the shaft pointing upwards.