MPL-A540K-SJ72AA

The Allen-Bradley MPL-A540K-SJ72AA MPL series servo motor is a low-inertia, high-output brushless servo motor that is designed for high-performance motion control applications. The MPL-A540K-SJ72AA servo motor offers enhanced winding technology and a high-energy rare-earth magnetic rotor for high levels of performance. It features “smart motor technology” with a built-in communication link and motor identification for quick and advanced integration into a control system. The MPL-A540K-SJ72AA servo motor has a rated maximum rotor speed of 4000 RPM at the rated motor output. It also has a continuous current rating of 41.5 Amps and a peak stall current rating of 120 Amps (0 to peak). The MPL-A540K-SJ72AA servo motor has a continuous stall torque rating of 172 pounds on an inch and a peak stall torque rating of 430 pounds on an inch. The MPL-A540K-SJ72AA MPL series servo motor has a rated operating voltage of 230 Volts AC and a maximum motor output rating of 5.5 kilowatts.

The Allen-Bradley MPL-A540K-SJ72AA MPL series servo motor has a single-turn high-resolution absolute encoder feedback option with Hiperface protocol support. This encoder option provides precise and absolute position feedback within a single turn. The MPL-A540K-SJ72AA servo motor also has a rotatable circular SpeedTec DIN connector type that supports single-cable technology  for the communication, feedback, and power cables, and allows for flexible orientation with a rotating range of up to 180 degrees. The MPL-A540K-SJ72AA servo motor has a factory-installed shaft seal attached to the shaft compartments. It is manufactured in an IP 50 rated protective enclosure. The MPL-A540K-SJ72AA servo motor has a magnet stack length of 4 inches and a frame size of 165 millimeters. It also has free mounting holes for flange installation. The MPL-A540K-SJ72AA servo motor is CE certified and it is also designed to meet the UL and CSA industrial standards.