Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley MPL Servo Motors MPL-A540K-SK24AA

Product image is representative; revision or series may vary. Contact us to request a specific version.

MPL-A540K-SK24AA

|
Need a Specific Revision?

The Allen-Bradley MPL-A540K-SK24AA MPL series AC brushless servo motor is designed to meet the demanding requirements of a high-performance motion control system. The MPL-A540K-SK24AA servo motor comes with a high-resolution single-turn absolute encoder and a 24 Volts DC holding brake option. It has a maximum rotor speed of 4000 RPM at 230 Volts AC and rated motor output of 5.5 kilowatts.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for MPL-A540K-SK24AA

ManufacturerAllen Bradley
CategoryMotors
Product LineMPL Servo Motors
Part NumberMPL-A540K-SK24AA
Weight20.00 lbs (9.07 kg)
DescriptionBrushless AC Servo Motor
Voltage Class200 Volts AC
Rated Motor Output5.5 Kilowatts
Rated Rotor Speed4000 RPM
Feedback TypeHigh-Resolution Single-Turn Encoder
24 Volts DC Brake OptionYes
Frame Size165 Millimeters
Connector TypeCircular Bayonet DIN Connector
Magnet Stack Length4 Inches
Enclosure TypeIP 50
Request a Repair

The MPL-A540K-SK24AA servo motor is an AC brushless servo motor from the Allen-Bradley MPL low-inertia servo motor series. The MPL-A540K-SK24AA servo motor features a compact yet dynamic motor design that is made to meet the demanding requirements of modern motion control systems. It features an improved and efficient winding technology that can deliver high levels of torque and reduce downtimes. The MPL-A540K-SK24AA servo motor has a 3-phase voltage class rating of 200 Volts AC and a rated power output of 5.5 kilowatts at 230 Volts AC. The MPL-A540K-SK24AA servo motor has a 0 to peak current rating of 41.5 Amps and a peak rating of 120 Amps. The MPL-A540K-SK24AA servo motor has a stall torque rating of 19.4 N-m with a peak torque value of 48.6 N-m. The servo motor has a peak rotor speed of 4000 RPM at the rated motor output, and it has a maximum radial load rating of 90 kilograms (199 pounds).

The Allen-Bradley MPL-A540K-SK24AA MPL series AC brushless servo motor is supplied with a high-resolution single-turn absolute encoder which provides absolute position feedback within a single turn. The MPL-A540K-SK24AA servo motor has a keyed shaft without a factory-installed seal, and it is built with an IP 50 default environmental protection rating. It features the new and improved SpeedTec DIN connector with support for single cable connections. This DIN connector has a circular bayonet shape that directly faces the motor shaft. The MPL-A540K-SK24AA servo motor has a 24 Volts DC holding brake option that provides dynamic braking in high-precision and safety applications. The holding brake option is a spring-set type of holding brake and it has a holding torque rating of 10.2 N-m (90 pounds on an inch) and a rated coil current of 0.74 Amps.