MPL-A560F-MJ22AA

The MPL-A560F-MJ22AA is an Allen-Bradley servo motor that is part of the Kinetix Rotary motion control system. This product is specifically a low inertia servo motor, built with high-energy rare-earth magnets and capable of Smart Motor Technology. This servo motor is essentially a Brushless AC synchronous servo motor with standard environmental rating of IP50 which can be increased to IP66 with applied with optional shaft seal and utilization of environmentally sealed cables. This servo motor is compatible with a variety of Servo Drives such as Kinetix 5500, Kinetix 6200/6500, Kinetix 6000, Kinetix 300/350, Kinetix 2000, Kinetix 7000 and Ultra3000 Digital Servo Drive and especially designed for use in a variety of applications particularly Packaging, Converting, Material handling, Electronic assembly, Automotive and Metal forming applications. For motor installation, thisservo motor adheres to the Standard IEC 72-1 mounting dimensions. The MPL-A560F-MJ22AA is a 200 V class, servo motor with frame size of 165 mm and magnet stack length of 152.4 mm or 6.0 inches. It has maximum speed of 3000 rpm, continuous stall torque of 26.8 N-m (237 lb-in), peak stall torque of 61.0 N-m (540 lb-in) and rotor inertia output of 0.00213 kg-m2 (0.00019 lb-in-s2). This servo motor has rated output power of 5.3 kW. An integrated multi-turn, 1024 sin/cos, absolute encoder that supports Hiperface protocol is installed to this motor, providing position feedback to the partner servo drive. It comes without a shaft key and shaft seal. Compatible shaft seal kit that can be used with the MPL-A560F-MJ22AA is MPL-SSN-A5B5. This servo motor approximately weighs 20.2 kg or 44.5 lb.

The MPL-A560F-MJ22AA motor is a servo motor that has been designed and manufactured by Allen-Bradley/Rockwell Automation. This servo motor is a member of the Allen-Bradley MPL Servo Motors series. The MPL-A560F-MJ22AA servo motor is a low-inertia type of industrial servo motor that has been designed for manufactured efficiency. It is part of the 200 Volts voltage class. The frame size for the MPL-A560F-MJ22AA servo motor is 165 millimeters. Its magnet stack length is 6 inches. The maximum rated motor rotation speed for the MPL-A560F-MJ22AA servo motor is 3000 RPM. The encoder that this servo motor uses for feedback is a multi-turn type of high resolution encoder. The MPL-A560F-MJ22AA servo motor comes with a shaft key, but it does not have a shaft seal. The connectors that the Allen-Bradley/Rockwell Automation MPL-A560F-MJ22AA MPL series servo motor comes with are circular bayonet connectors that face the motor shaft. Its mounting flange is an IEC metric type of mounting flange. This servo motor does not have a built-in brake, but it comes with all the standard factory-designated options. The MPL-A560F-MJ22AA servo motor should never be lifted by its shaft because this can cause the cap on the shaft to come loose or detach and cause the motor to be dropped and suffer damage. The cap on the shaft should be removed before motor installation, and the users can remove it with their hands or a screwdriver, but not with a hammer or another blunt and heavy tool that could damage the motor shaft. The cables connected to the MPL-A560F-MJ22AA servo motor should be connected so that they form drip loops which will lead moisture and condensation away from the connection points.