Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley MPL Servo Motors MPL-B1510V-EJ74AA

Product image is representative; revision or series may vary. Contact us to request a specific version.

MPL-B1510V-EJ74AA

|
Need a Specific Revision?

The Allen-Bradley MPL-B1510V-EJ74AA servo motor is an MPL series servo motor. It has a rated rotor speed of 8000 RPM. The weight of the MPL-B1510V-EJ74AA servo motor is 1 kilogram.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for MPL-B1510V-EJ74AA

ManufacturerAllen Bradley
Product TypeServo Motor
Product LineMPL Servo Motors
Part NumberMPL-B1510V-EJ74AA
Weight10.00 lbs (4.54 kg)
MountingFlange Mounting
Voltage400 Volts
Protection RatingIP 50
ConnectorSpeedTec DIN Connector
EncoderYes
Maximum Speed8000 RPM
Power Output0.16 Kilowatts
Request a Repair

The Allen-Bradley MPL-B1510V-EJ74AA servo motor is a MPL series servo motor with a maximum rated rotor speed of 8000 RPM. The voltage class to which the motor belongs is 400 Volts AC. The frame size of the MPL-B1510V-EJ74AA servo motor is 63 millimeters. The motor has a rated continuous stall torque of 2.3 pounds on an inch and a rated peak stall torque of 6.8 pounds on an inch. The rated power delivered by the servo motor at its output is 0.16 kilowatts. The MPL-B1510V-EJ74AA servo motor is a low-inertia servo motor and it has rated rotor inertia of 0.000065 pounds per square inch. The approximate motor weight is 1 kilogram. The weight of the holding brake that is available for the motor is 1.2 kilograms, leading to a total system weight of 2.2 kilograms. Other specifications for the holding brake include a voltage rating of 24 Volts DC, 8 pounds on an inch of holding torque, and 23 milliseconds of release time.

The radial load force ratings for the Allen-Bradley MPL-B1510V-EJ74AA MPL series servo motor are as follows: 52 pounds at 1000 RPM, 41 pounds at 2000 RPM, 33 pounds at 4000 RPM, and 26 pounds at 8000 RPM. The axial load force ratings for the motor are as follows: 33 pounds at 1000 RPM, 22 pounds at 2000 RPM, 15 pounds at 4000 RPM, and 11 pounds at 8000 RPM. Other features supported by the MPL-B1510V-EJ74AA servo motor include a 128 sin/cos absolute single turn encoder with the Hiperface protocol, a shaft key with no shaft seal, a 180-degree rotatable right angle circular (speedTec) DIN connector, and an IEC metric mounting flange with free mounting holes. The protection rating of the MPL-B1510V-EJ74AA servo motor is IP 50 when it is mounted with the shaft pointing upwards.