MPL-B1520U-VJ74AA

The MPL-B1520U-VJ74AA servo motor is a low-inertia brushless servo motor with high levels of efficiency and flexibility. The motor has been designed and manufactured by Allen-Bradley. The servo motor needs 400 Volts AC input voltage for normal operation. The 63-millimeter body frame houses the internal parts of the servo motor. This magnetic rotary servo motor is widely used in different industries for position control. The feedback equipped in the servo motor helps to understand the operation of the servo motor. The MPL-B1520U-VJ74AA servo motor has a magnetic stack length of 20. The running speed of the motor is 7000 rpm. This servo motor has been certified with different motor certifications. It meets all the requirements to obtain the EMC rating. Also, it has been awarded the CE rating. The DIN connector used in the servo motor allows for the flexible orientation of connectors and a single cable family that can be used with all of the MP series motors. The motor has a peak torque of 163 N-m.

The MPL-B1520U-VJ74AA servo motor uses the RS-485 link as the communication link. It automatically reports the motor identity to the system and it reduces the overall commissioning time of the servo motor. The servo motor is equipped with a multi-turn encoder for feedback purposes. It uses up to 4096 turns to provide high-resolution absolute position feedback. Shaft seal kits are available for the MPL-B1520U-VJ74AA servo motor as an add-on feature. When installed properly, this seal yields an IP 66 protection rating at the shaft. The IP 66 protection rating indicates the waterproof ability of the shaft seal. A clean environment with a temperature between 0 and 40 degrees Celsius is required in the installation environment. The surrounding area should be relatively humid (5 to 95%) and no traces of electromagnetic noise should be present in that installation area.