Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley MPL Servo Motors MPL-B1530U-EJ74AA

Product image is representative; revision or series may vary. Contact us to request a specific version.

MPL-B1530U-EJ74AA

|
Need a Specific Revision?

This low inertia permanent magnet servo motor manufactured by Allen Bradley/Rockwell Automation has a speed rating of 7000 revolutions per minute. This brushless motor comes with a shaft key, with no shaft seal included on the shaft of this servo motor and a brake built into the motor in case braking is required. Also, this low rotor inertia permanent magnet servo motor is a 165 millimeter frame servo motor. In addition, this compact brushless motor has a single-turn absolute (high-resolution) encoder feedback. Furthermore, this module has circular DIN, right angle, 180 degrees rotatable servo cable connections which are pre-installed on this brushless servo motor.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for MPL-B1530U-EJ74AA

ManufacturerAllen Bradley
CategoryMotors
Product LineMPL Servo Motors
Part NumberMPL-B1530U-EJ74AA
UPC884951213784
Weight12.00 lbs (5.44 kg)
SeriesPremium permanent magnet rotary servo motor
Series TypeLow-inertia
Voltage Class400 Volts AC
Frame Size63 millimeters
Magnetic Stack Length3 inches
Rated Speed7000 rpm
FeedbackSingle-turn high-resolution encoder
Shaft Key/SealShaft key/no shaft seal
ConnectorsCircular DIN, right angle, 180 degrees rotatable
Brake24 Volts DC brake
Mounting FlangeIEC metric
Factory Designated OptionsStandard
View as PDF
Request a Repair

The MPL-B1530U-EJ74AA servo motor device is used for controlling the angular position, velocity, and acceleration of a bigger machine. The servo motor comes with a normal motor and it is also paired with a sensor for position feedback. The position feedback sensor is used to control the rotational speed and position. The MPL-B1530U-EJ74AA servo motor is a 400 Volts AC unit. It uses a low profile field reversible motor connector for minimal servo motor impact on the overall design of the machine. It is a rotary servo motor and it uses a flange mount for placing the servo motor in different locations. The servo motor comes with a minimum stall torque of 0.26 N-m and a maximum servo motor of 163 N-m. The MPL-B1530U-EJ74AA servo motor has a continuous output torque of 0.9 N-m. The motor weighs 1.6 kilograms. The servo motor has a maximum vibration frequency of 2000 Hertz. The motor can withstand shocks for a duration of 6 milliseconds. The minimum operating temperature of the motor is 0 degrees Celsius and the maximum operating temperature is 70 degrees Celsius. The motor also needs a relatively humid environment with 5 to 95%, non-condensing.

A single-turn high-resolution feedback encoder is used in the MPL-B1530U-EJ74AA servo motor to pass the feedback information to the operators. The information is passed along by using serial communication. The MPL-B1530U-EJ74AA servo motor has a rated speed of 7000 rpm. No shaft key or shaft seal is equipped in this servo motor variant. This Allen-Bradley manufactured servo motor is housed inside a 63-millimeter frame for protection. A 24 Volts DC holding brake is used to slow down the servo motor. The holding brake option in the MPL-B1530U-EJ74AA servo motor uses a spring which is released when a certain amount of voltage is passed to the coil of the holding brake. The holding brake should not be used for stopping the motor shaft completely.

Revision Part #Also known as
MPL-B1530U-EJ74AA Ser AMPL-B1530U-EJ74AA/A, Series A, Rev A
Don't see your particular revision? Contact us now.