MPL-B1530U-HJ72AA

Designed by Allen-Bradley, the MPL-B1530U-HJ72AA servo motor is an MP-series low-inertia servo motor. The MPL-B1530U-HJ72AA servo motor has 430 Volts AC of motor voltage. The MPL-B1530U-HJ72AA servo motor is designed with the IEC metric mounting flange and the standard factory-designated control options. The optimal operating temperature range is 0 degrees Celsius to 40 degrees Celsius while the optimal storage temperature range is -30 degrees Celsius to 70 degrees Celsius. During the installation of the servo motor, consider the storage environment and the general operating environment carefully. The common causes of Allen-Bradley low-inertia servo motor failure include electrical under load or overload, overheating, exposure to moisture and dirt, and being subjected to high levels of vibration. Exposure to electromagnetic interference is another cause of malfunctioning because electrical surges affect the functionality of the Allen-Bradley servo motor. Ensure that EMI prevention procedures are applied.

The MPL-B1530U-HJ72AA servo motor can have poor performance if it is subjected to overheating. The Allen-Bradley servo motor comes with a magnetic stack length of 3 inches while the unit features a 63 millimeters frame size. To prevent exposure to moisture or harmful liquids, provide a shield on the servo motor when the MPL-B1530U-HJ72AA servo motor is installed. The shield protects the servo motor housing and the shaft seals from contamination by foreign matter which includes moisture and dust. A drip loop should be provided on each one of the motor cables to keep liquids away from the servo motor. The Allen-Bradley MP series low-inertia servo motor has a rated motor speed of up to 7000 revolutions per minute.