MPL-B1530U-VJ42AA

The MPL-B1530U-VJ42AA servo motor is an Allen-Bradley low-inertia servo motor. The motor has a rated speed of 7000 RPM and it has an armature voltage rating of 460 Volts AC. It comes in a stainless-steel body with a frame size of 63 millimeters. The motor is part of the MPL series of brushless servo motors by Allen-Bradley/Rockwell Automation. The torque rating of the motor is 0.9 N-m and the rated output power of the servo motor is 0.39 kilowatts. The MPL-B1530U-VJ42AA servo motor uses a keyed shaft extension and it has a stack length of 3 inches. The device uses IEC metric mounting for mounting the servo motor in different positions. It also comes with Type FF free mounting holes. No braking option is enabled in this servo motor. The device comes with a multi-turn 128-bit sin/cos absolute encoder for operational feedback. It keeps track of the device from the point it is started at and it can pass the status and information to the operator by using serial communication.

The MPL-B1530U-VJ42AA servo motor is certified with the UL, CSA, KC, and UL standards. It has also been recognized with the CE marking. The CE mark approves the device for operation in different regions, including Europe. The Allen-Bradley/Rockwell Automation MPL-B1530U-VJ42AA servo motor can only be used at a temperature between 0 and 40 degrees Celsius. It needs a relatively humid environment for normal operation. The drive has no shaft seal but an additional IP 66 rated seal can be used to add extra waterproof ability. The device supports a wide range of torque and handles many application demands. It is a low-profile device which can be used with field reversible motor connectors for minimal servo motor impact on the machine design.