MPL-B1530U-VJ74AA

The MPL-B1530U-VJ74AA servo motor is a 3-phase servo motor manufactured by Allen-Bradley. The servo motor meets different application requirements. The servo motor is used for precision positioning and enhanced machine performance. These servo motors are also referred to as control motors. Servo motors are used in different applications. The MPL-B1530U-VJ74AA servo motor is a low-inertia device with a 63-millimeter frame size. The required input voltage rating of the motor is 400 Volts AC. The speed rating of the motor is 7000 rpm. The continuous stall torque of the motor ranges from 0.26 to 163 N-m. The MPL-B1530U-VJ74AA servo motor has a peak torque between 0.77 and 278 N-m. The motor is equipped with a 24 Volts DC brake. The braking system is considered to be a cost-effective solution for controlling the motor. The motor features an enhanced feedback system. It delivers the real-time running information of the servo motor to the operator of the motor. The feedback system runs throughout the running time of the servo motor. No shaft seal is present in the servo motor. The servo motor uses smart motor technology.

The MPL-B1530U-VJ74AA servo motor is compactly manufactured and it can fit into small industrial locations. The servo motor is certified with CE requirements. The CE requirement allows the servo motor to be used in different global locations, including Europe. The servo motor should be installed away from heat radiating devices. It decreases the running performance of the motor. Proper vertical clearance should be present around the motor. No corrosive gas or vapor should be present in the installation environment. The MPL-B1530U-VJ74AA servo motor uses a circular DIN connector which can be rotated anywhere within 180 degrees. The feedback resolution encoder of the servo motor uses 128 cycles per revolution. The feedback encoder uses the Hiperface protocol. The servo motor has an output torque of 1.58 N-m.