MPL-B220T-EJ72AA

The MPL-B220T-EJ72AA low-inertia servo motor from Allen-Bradley/Rockwell Automation is part of the MP servo motor series. The motors from this series are compatible with the Kinetix (2000, 6000, and 7000) and Ultra 3000 servo drives that are also produced by Allen-Bradley/Rockwell Automation. This MP motor is a very dynamic and powerful unit that can enhance the overall performance of a system. The MPL-B220T-EJ72AA servo motor is a CE marked product that is manufactured under strict conditions in order to comply with all of the applicable industrial standards. The memory of the motor that is integrated on the board retains its identity while the system receives identity reports automatically through the communication link.

The MPL-B220T-EJ72AA servo motor can achieve a speed of up to 6000 rpm while the inertia of the rotor is 0.000039 kilograms per square meter. In addition to that, the motor has a rated output of 0.62 kilowatts and a voltage rating of 400 Volts AC. The MPL-B220T-EJ72AA servo motor has a frame size of 75 millimeters and it includes a shaft key without a shaft seal. Also, this high-performance servo motor comes with connectors that are 180 degrees rotatable and an IEC metric mounting flange. Besides that, the motor is delivered with factory designated control options and it does not include a brake. The connectors of the MPL-B220T-EJ72AA servo motor are intended for professional use and they are built to meet the requirements of standards such as the NFPA 79, RoHS, REACH, and the UL standards. Advanced SpeedTEC DIN connectors feature a simple one-quarter turn connection and compatible cables that comply with all of the related regulations.

The Allen-Bradley MPL-B220T-EJ72AA is a servo motor that is compatible for use with Kinetix 5500, Kinetix 5700, Kinetix 6200/6500, Kinetix 6000, Kinetix 300/350, Kinetix 2000, and Kinetix 7000. This servo motor belongs to the MPL series of low-inertia, brushless AC synchronous servo motors. It is high-energy rare-earth magnets installed which greatly improve the acceleration and output torque.

The MPL-B220T-EJ72AA is a 400 Volt class motor with a 75-millimeter frame size. It has a magnetic stack that measures 2-inches with a rated speed of 6000 RPM. It has a built-in encoder that supports Hiperface (Stegmann) protocol which allows digital communication between the partner Kinetix Servo Drive for faster processing of feedback, accurate position monitor and motion control. This encoder is a 128 sin/cos, absolute single-turn encoder which may also be replaced by other supported encoders by the MPL series such as 1024 sin/cos cycles per revolution for up to 21-bit resolution or multi-turn encoder provides high-resolution absolute position feedback within 4096 turns.

The MPL-B220T-EJ72AA is installed with a keyed shaft and uses a Circular SpeedTec DIN connector, right angle, 180° rotatable for fast and secured connection. It may also utilize the 2090 Smart cabling system with aim to reduce wiring and simplified connection of power and signals.

The MPL-B220T-EJ72AA can be used in a wide range of industrial applications such as Packaging, Converting, Material Handling, Electronic Assembly, and Automotive. It may also be used in other applications with similar demands and requirements to the mentioned examples. This motor has a default protection rating of IP50, minimum. It can attain up to IP66 if used with the appropriate shaft seal and environmentally sealed connectors.