MPL-B220T-VJ72AA

The MPL-B220T-VJ72AA servo motor is a servo motor with a maximum speed of 6000 RPM. This AC servo motor is a part of the MP-series of servo motors manufactured by Allen-Bradley. The MPL-B220T-VJ72AA servo motor is a 400 Volts AC class brushless servo motor that is characterized as a high torque to size ratio rated industrial automation device. The motor has a multi-turn high-resolution absolute feedback encoder that uses the Hiperface protocol and it has 15-bit resolution. This encoder runs without a battery thanks to its electromechanical design. The MPL-B220T-VJ72AA servo motor is equipped with an internal memory chip which retains the motor identity (for automatic reporting to Allen-Bradley Kinetix series controllers during commissioning). The enclosure of this servo motor is made of aluminum, and its surface is designed to enable fast heat dissipation. Safe and reliable connections between the MPL-B220T-VJ72AA servo motors and other devices and systems is established via the SpeedTEC, right-angled, 180-degree rotatable connectors. The servo motor’s rated output power is 0.62 kilowatts, and its continuous stall torque is 14.2 pounds on an inch. The shaft of the servo motor is mechanically connected to loads over flexible connectors. Users should make sure that pulleys and couplings are properly fastened and make periodic inspections of these connections. The Allen-Bradley MPL-B220T-VJ72AA brushless servo motor is typically paired with the Allen-Bradley Kinetix 300, 350, 6000, 6200, and 6500 servo drive series. These controllers can help the servo motor to deliver consistent torque in ultra-dynamic applications. By taking feedback information from the encoder, servo drives will act instantly and handle applications with quick and frequent acceleration and deceleration rates. This servo motor is CE, UL, and CSA certified.

The Allen-Bradley MPL-B220T-VJ72AA is a Low inertia servo motor from the MPL series of servo motors. This servo motor has an increase Torque output and is capable of Smart Motor Technology. Additionally, the encoder modules installed along this servo motor are capable of digitally communicating through the Hiperface (Stegmann) encoder protocol.

The MPL-B220T-VJ72AA is essentially a brushless AC synchronous servo motor that utilizes high-energy rare-earth magnets that contributes to the high Torque generation and improved braking capability. This servo motor has an IP50 Protection rating which may be increased up to IP65 if installed with the appropriate shaft seal and used with environmentally sealed cable connectors.

The MPL-B220T-VJ72AA is ideal for use in a wide variety of industrial applications which include packaging, converting, material handling, electronic assembly, automotive, and similar applications. This drive supports a variety of Kinetix servo drives such as Kinetix 5500, Kinetix 5700, Kinetix 6200/6500, Kinetix 6000, Kinetix 300/350, Kinetix 2000, and Kinetix 7000.

The MPL-B220T-VJ72AA is a 400 Volt class motor that operates at an input supply voltage of 460 Volts AC, 47-63 Hertz. It has an output power of 0.62 Kilowatts; rated speed of 6000 RPM and rotor inertia of 0.000039 kg-m2 (0.00035 lb•in•s2). It has continuous stall Torque rating of 1.61 Newton-meters or 14.2 lb-in; Peak Stall Torque rating of 4.74 Newton-meters or 42 lb-in. It has a built-in 128 sin/cos, absolute multi-turn encoder (Hiperface protocol) used for position feedback. It is installed with a keyed shaft and uses a Circular SpeedTec DIN connector, right angle, 180° rotatable.