MPL-B230P-HJ42AA

The Allen-Bradley MPL-B230P-HJ42AA servo motor is a microprocessor-controlled synchronous AC motor. It is rated for 5000 rpm and it is part of the low-inertia Allen-Bradley MPL series of servo motors. With a 75-millimeter frame size and a 76.2-millimeter magnet stack length, the MPL-B230P-HJ42AA servo motor weighs 2.6 kilograms and it delivers up to 5000 rpm speed and 0.86 kilowatts of power at 400 Volts AC input. The additional performance specifications include 2.6 Amps of continuous stall current, 11.3 Amps of peak stall current, 2.1 N-m of continuous stall torque, 8.2 N-m of peak stall torque, and 0.000063 kg-m2 of rotor inertia.

Low-inertia MPL series motors such as the MPL-B230P-HJ42AA servo motor are equipped with SpeedTEC DIN connectors that allow for the flexible orientation of the connectors and also enable a single cable family to be used with all MPL series motors. The connectors comply with a wide range of standards and codes, including the RoHS, NFPA 79, and REACH standards. Additional motor features include a 2000-line per revolution incremental encoder, a shaft key, and an IEC metric flange. A shaft seal and motor brake are not part of the standard motor package. However, options kits for both the shaft seal and motor brake are available and they can be ordered separately depending on customer requirements. The working temperature range for the MPL-B230P-HJ42AA servo motor is from 0 to 40 degrees Celsius. The environmental protection rating for the motor is IP 53 with the shaft in a downward position, it is IP 51 with the shaft in a horizontal position, and it is IP 50 with the shaft in an upward position. The installation of a seal kit leads to an enhanced environmental protection rating of IP 60 because the seal protects the motor bearings from dust and moisture.