Product image is representative; revision or series may vary. Contact us to request a specific version.
MPL-B230P-HJ44AA
This Allen-Bradley MPL permanent magnet servo motor has a speed rating of 5000 RPM. Furthermore, this VAC drive also comes with a braking feature included in the servo motor if braking is needed. This MPL permanent magnet motor needs 400 VAC to operate. In addition, it has a 2000 line encoder feedback included on the servo and a shaft key, but no shaft seal built into the shaft.
-
We sell industrial automation parts backed by our free 2-Year DO Supply Warranty.
-
Same-day domestic and fast international shipping with UPS, FedEx, DHL, and more.
-
AMEX, Visa, MasterCard, Discover, wire transfer, net terms, and more.
-
Repairs and exchanges are available for all automation products.
- Reseller Options
Drop shipping, blind shipping, and account shipping with no extra fees.
Technical specifications for MPL-B230P-HJ44AA
| Manufacturer | Allen Bradley |
|---|---|
| Category | Motors |
| Product Line | MPL Servo Motors |
| Part Number | MPL-B230P-HJ44AA |
| Weight | 7.00 lbs (3.18 kg) |
| Series | Premium permanent magnet rotary servo motor |
| Series Type | Low inertia |
| Voltage Class | 400V |
| Frame Size | 75 mm |
| Magnetic Stack Length | 3 in. |
| Rated Speed | 5000 rpm |
| Feedback | 2000 line encoder |
| Shaft Key/Seal | Shaft key/no shaft seal |
| Connectors | 3 Connectors |
| Brake | 24V DC brake |
| Mounting Flange | IEC metric |
| Factory Designated Options | Standard |
The MPL-B230P-HJ44AA motor from Allen-Bradley/Rockwell Automation is a premium permanent magnet type of industrial servo motor. It is part of the MPL servo motors series. The MPL-B230P-HJ44AA servo motor is a low-inertia servo motor and its magnet stack length is 3 inches. It can handle up to 2000 lines of feedback with an encoder and it is rated for a maximum speed of 5000 RPM. The MPL-B230P-HJ44AA servo motor comes with a shaft key but no shaft seal. It is also equipped with a 24 Volts DC rated brake. The frame size for this servo motor is 75 millimeters. This permanent magnet servo motor has been designed to be brushless and to be as compact as possible while retaining a high level of efficiency.
The Allen-Bradley/Rockwell Automation MPL-B230P-HJ44AA permanent magnet low-inertia servo motor’s 24 Volts DC rated brake is a holding brake that is meant to hold the motor’s shaft at 0 RPM after the shaft has stopped. However, this holding brake is not meant to be used to stop the shaft rotation directly and it is not meant to be used as an emergency device, and misuse of the holding brake may damage the brake or the motor. The holding brake can be used occasionally to stop the motor in the event of a power failure, but it cannot be used in this manner too often. When cables are connected to the MPL-B230P-HJ44AA servo motor, they must be connected so that they form drip loops that will route moisture away from the servo motor and its connection points.
| Revision Part # | Also known as | |
|---|---|---|
| MPL-B230P-HJ44AA Ser A | MPL-B230P-HJ44AA/A, Series A, Rev A | |
| Don't see your particular revision? Contact us now. | ||
- MPL-8230P-HJ44AA
- MPL-823OP-HJAAAA
- MPL-B230P-HJ4AAA
- MPL-B230P-HJA4AA
- MPL-B230P-HJAAAA
- MPL-B23OP-HJ44AA
- MPL8230PHJ44AA
- MPL823OPHJAAAA
- MPLB230PHJ44AA
- MPLB230PHJ4AAA
- MPLB230PHJA4AA
- MPLB230PHJAAAA
- MPLB23OPHJ44AA
This Premium permanent magnet rotary servo motor (Low inertia) includes a 400V, 75 mm frame size, with a magnetic stack length of 3 in., a rated speed of 5000 rpm, a 2000 line encoder feedback, Shaft key/no shaft seal, 3 Connectors, 24V DC brake, IEC metric, and Standard designated options.