MPL-B230P-VJ42AA

The MPL-B230P-VJ42AA is a servo motor with a keyed shaft extension from the MPL series by Allen-Bradley. The IEC metric mounting option is used for mounting the device in factory locations. This mounting is not water-resistant and it can only be used in an indoor location. The stack length of the magnets in the servo motor is 3 inches. These magnets are used for their adhesive force. The armature voltage rating of the servo motor is 460 Volts AC. It is a 3-phase device and it has the ability to draw power from a 3-phase electrical source. The MPL-B230P-VJ42AA servo motor has a torque rating of 2.1 N-m and it generates 0.86 kilowatts of power. A multi-turn absolute encoder with 128 Sin/Cos is used for recording the feedback from the servo motor. This feedback information is then used to adjust other settings by the operators. The stainless-steel body of the MPL-B230P-VJ42AA servo motor has a 75-millimeter frame size. The rated speed of the motor is 5000 RPM. Free mounting holes are also present in the motor for different mounting positions. The MPL-B230P-VJ42AA servo motor uses premium rare earth materials to improve its acceleration. All of the MPL series servo motors are equipped with the SpeedTec DIN connector which allows for flexible connection with other automation devices. The connector of the servo motor can be used at a right angle. The connector is rotated at an angle of up to 180 degrees. The running temperature range of the servo motor is from 32 to 104 degrees Fahrenheit. The MPL-B230P-VJ42AA servo motor is a series A device. All the connections between the system and the servo motor shaft must have a stable connection for acceptable responses from the system.

The Allen-Bradley Kinetix Servo Motor with part number MPL-B230P-VJ42AA is part of the MPL product family that boasts of high torque to size ratio, low inertia output and supports Smart Motor Technology as well as the Hiperface (Stegmann) protocol. This servo motor is of Brushless AC synchronous motor type which is installed with high-energy rare earth magnets that contributes to the motor’s efficient generation of torque and improved braking.

The MPL-B230P-VJ42AA is a servo motor that requires use of a Servo drive to implement the desired motion control behavior. Being part of the Kinetix Motion control system, the MPL-B230P-VJ42AA is used with the Kinetix 5500, Kinetix 5700, Kinetix 6200/6500, Kinetix 6000, Kinetix 300/350, Kinetix 2000, and Kinetix 7000. Additionally, this servo motor is provided with a built-in multi-turn absolute encoder, 128 sin/cos that uses the Hiperface protocol. This Hiperface protocol is a digital communication protocol that is used by the motor and the servo drive to communicate faster as well as provide rapid response for more accurate positioning.

The MPL-B230P-VJ42AA is a 400 Volt class motor which operates with an input supply voltage of 460 Volts AC, 47-63 Hertz. It has an output power of 0.86 Kilowatts with a maximum speed of 5000 RPM. It has a continuous stall torque of 2.10 Newton-meters or 18.6 lb-in; 8.20 Newton-meters (73 lb-in.). It has a rotor inertia of 0.000063 kg-m2 or 0.00056 lb•in•s2 and weighs approximately 2.6 kilograms or 5.7 pounds.

The MPL-B230P-VJ42AA can be used to control applications in the packaging, Converting, Material handling, Electronic assembly, automotive, and other applications.