MPL-B230P-VJ74AA

The MPL-B230P-VJ74AA servo motor is a servo motor designed and engineered by Allen-Bradley. This is a low-inertia 400 Volts AC class brushless servo motor. The unit comes with a frame size of 75 millimeters and with a 3-inch magnetic stack length. The MPL-B230P-VJ74AA AC premium permanent magnet rotary servo motor features a multi-turn high-resolution encoder. It is a high-speed device that runs at 5000 RPM. This servo motor combines high speeds with precise positioning and speed control. To achieve this, the MPL-B230P-VJ74AA servo motor is manufactured under constricted control parameters, and it is always coupled with Kinetix series servo drives that are manufactured by Allen-Bradley. Only when it is controlled with premium drives can this motor deliver smooth and precise acceleration and positioning.

The Allen-Bradley MPL-B230P-VJ74AA AC servo motor comes with a shaft key without a shaft seal, and with circular DIN, right angle, 180-degree rotatable connectors. To support the specified motor thermal rating (0 to 40 degrees Celsius), do not mount the servo motor in surroundings with limited airflow. Do not position this AC servo motor near other heat-producing devices, but mount the unit on an aluminum surface or on a surface that has at least the equivalent heat dissipation coefficient as aluminum. The bearings installed on the shaft of the MPL-B230P-VJ74AA servo motor are high quality to ensure at least 20,000 working hours and to be able to withstand the expected axial and radial loads. If any vibration or strange noise is observed during the motor operation, the users should check and replace the bearings to prevent the deterioration of other motor parts that are more expensive.