MPL-B310P-MJ22AA

The Allen-Bradley/Rockwell Automation MPL-B310P-MJ22AA servo motor. The motor is made with innovative winding technology that allows for up to 40% higher torque in comparison to the standard motors available on the market. The MPL-B310P-MJ22AA servo motor also uses an improved winding insulation material that ensures much better management of heat and provides an opportunity for higher performance. This motor is one of the available motors from the Allen-Bradley MP series that offers continuous stall torque from 0.26 to 163 N-m along with peak torque in the range of 0.77 to 278 N-m. In addition to that, these high-performance motors can include high-performance encoders that come with either single-turn or multi-turn high-resolution encoders. The MPL-B310P-MJ22AA servo motor features smart motor technology that allows for the maintaining of the identity of the motor through an onboard memory. This premium permanent-magnet rotary servo motor belongs to the voltage class of 400 Volts AC and it features a maximum speed of 5000 rpm. The motor includes a feedback encoder with multi-turn high-resolution that can be further used in combination with an Allen-Bradley Kinetix drive to provide a safe-off feature. Besides that, the motor comes with flange-mounted (IEC metric) and connectors of the circular bayonet type (facing the shaft). The MPL-B310P-MJ22AA servo motor comes without a brake and with a shaft key (no shaft seal). Additional shaft seal kits can be included in order to get an IP 66 protection rating that is needed for special applications. Besides that, the users can purchase optional motor-end connector kits if they want to make their own cables. These connector kits have top-quality compression-style sealings to the cable jacket and crimp-style sockets. The MP motors provide a choice of cables that can be used, including flexing cables that can be up to 90 meters long. Also, it should be mentioned that the motor comes with standard control options.

The MPL-B310P-MJ22AA supports integration to higher control systems including Programmable Logic Controller (PLC), Human Machine Interface (HMI) and Supervisory Control and Data Acquisition (SCADA) systems. This can made possible when this servo motor is used with an appropriate Kinetix servo drive. A wide selection is available which includes Kinetix 5500, Kinetix 5700, Kinetix 6200/6500, Kinetix 6000, Kinetix 300/350, Kinetix 2000, and Kinetix 7000. This servo motor is Smart motor technology enabled, provided with an on-board memory and communication link allowing accessing of motor identity over the communication network.

This servo motor is a 400V voltage class motor with frame size measuring 100 mm and magnet stack that measure 25.4 mm or 1.0 inches. This servo motor has rated speed of 5000 rpm and uses a multi-turn, absolute encoder with 1024 sin/cos and compatible with Hiperface protocol. For installation, it has IEC metric compliant FF type mounting holes.

This installed encoder with this servo motor may also act as a component of the Kinetix safe-Torque off capability. By default, this servo motor has an environmental rating of IP55 as it does not come without a shaft seal however, when installed with the appropriate shaft seal, this servo motor meets IP66 protection rating. This servo motor has an operating temperature range of 0 - 40º C or 32 - 104º F.