MPL-B310P-MJ72AA

The Allen-Bradley MPL-B420P-MJ74AA is an MP-Series low-inertia, standard brushless AC synchronous rotary servo motor manufactured by Rockwell Automation. It has a rated speed of 5000 RPM, a voltage class of 400V, and an armature voltage of 460V. The magnet stack length of this motor is 2 inches and its frame size is 115 mm, with the magnets used on the MPL-B420P-MJ74AA motor of a high-energy rare-earth type. This motor also features a multi-turn, 1024 sin/cos, absolute encoder feedback and a 24V DC brake. Note that the electromechanical design of the encoder does not require a battery. Standard factory options are available with the MPL-B420P-MJ74AA motor and its connectors are circular SpeedTec DIN connectors that are 180o rotatable and with a right angle. It uses an IEC metric, Type FF free mounting holes mounting flange and has a keyed shaft extension enclosure. The continuous stall torque of the MPL-B420P-MJ74AA motor is 4.74 Nm or 42 lb-in and its peak stall torque is 13.5 Nm or 120 lb-in. It also has a motor rated output of 1.9 kW and a speed at a motor rated output of 5000 RPM. MP-Series motors, such as the MPL-B420P-MJ74AA motor, feature a low rotor inertia, Smart Motor Technology, and a high torque-to-size ratio. They primarily deliver a significantly higher torque while featuring a reduced motor size, as required especially by high-performance motion systems. These motors are ideal for applications like metal forming, packaging, material handling, automotive, converting, and electronic assembly.

The MPL-B310P-MJ72AA is part of the Kinetix Motion control system of Allen-Bradley. This product is a servo motor that is used to drive mechanical loads to implement linear and rotary motions. This servo motor has standard characteristics which include high output Torque relative to its size; low-inertia output; supports Smart Motor Technology and the Hiperface (Stegmann) encoder protocol.

Additionally, the MPL-B310P-MJ72AA is basically a Brushless AC synchronous servo motor with high-energy rare-earth magnets. It comes with standard FF mounting holes and uses a circular SpeedTec connector in 90 Degree orientation and rotatable up to 180 degrees. This servo motor also has a built-in 1024 sin/cos, absolute multi-turn encoder that supports the Hiperface protocol. This protocol is an industry standard, digital protocol that is used to perform high-speed data exchange between the encoder to the servo drive.

The MPL-B310P-MJ72AA is compatible with a variety of Kinetix Servo drives inclduing Kinetix 5500, Kinetix 5700, Kinetix 6200/6500, Kinetix 6000, Kinetix 300/350, Kinetix 2000, and Kinetix 7000. It may be used in Material handling, Converting, Packaging, Automotive, electronic assembly and other applications.

The MPL-B310P-MJ72AA is a 400 Volt class servo motor with an output power of 0.77 Kilowatts and a maximum operating speed of 5000 RPM. It has a rotor inertia of 0.000044 kg-m2 (0.00039 lb•in•s2) and weighs 2.7 kilograms or 5.8 pounds. This motor is UL recognized and applicable to UL and CSA standards. It has an IP50 protection rating by default which can be upgraded up to IP66 when installed with appropriate shaft seal and sealed connection cables.