MPL-B310P-MJ74AA

The MPL-B310P-MJ74AA is a servo motor that is used for implementing motion and position control in different industrial applications. This servo motor is part of the Allen-Bradley Kinetic MP series servo motor of low-inertia, and High-Torque output. This servo motor has a compact and rugged design, enabling cost-effective and simplified installation. Additionally, this servo motor is constructed with built-in rare earth magnets that enhances the acceleration of this motor.

The MPL-B310P-MJ74AA, similar to other servo motor products, requires a servo drive controller to operate. For this servo motor, it is compatible for a wide variety of Kinetix drives controllers such as Kinetix 5500, Kinetix 5700, Kinetix 6200/6500, Kinetix 6000, Kinetix 300/350, Kinetix 2000, and Kinetix 7000. It Kinetix 5000 is used, the 2198-H2DCK (series B or later) Hiperface-to-DSL feedback converter kit is needed while 2198-K57CK-D15M universal feedback connector kit. Is required if Kinetix 5700 is required.

The MPL-B310P-MJ74AA is a motor with 400V operating voltage class. The frame of this servo motor measure 100 mm and 25.4 mm (1.0 in.) magnet stack measurement. It is designed to operate at a maximum speed of 5000 revolution per minute (rpm). It is provided with an absolute, multi-turn encoder with 1024 sin/cos and utilizes Hiperface or Stegmann protocol. This encoder serves as the servo motor’s feedback instrument. Additionally, it has a built-in 24VDC Holding brake mechanism used to meet the required braking method of the servo motor. This servo motor is also part of the Smart motor technology products of Allen-Bradley which comes with an on-board memory and communication link.

The MPL-B310P-MJ74AA servo motor is equipped with a 24 Volts DC holding brake that is suitable for maintaining the same position at zero revolutions per minute and it features a multi-turn high-resolution encoder. The speed and torque capabilities of the MPL-B310P-MJ74AA low-inertia servo motor are designed to meet the requirements of different motion systems and applications like packaging, electronics assembly, and automotive applications. The length of its magnetic stack is 1 inch and its high-energy rare-earth magnets provide improved acceleration across applications. The MPL-B310P-MJ74AA servo motor can achieve an IP 66 environmental protection rating when an Allen-Bradley MPL-SSN-A3B3 seal kit is affixed to the base of its shaft and when environmentally protected cable connectors are connected to its circular DIN rotatable connectors. Additionally, its coil design improves its torque capabilities without increasing motor size. The MPL-B310P-MJ74AA servo motor features a smart motor technology that automatically reports the ID on the servo motor’s memory to controllers in the motion system to reduce commissioning time. Note that the MPL-B310P-MJ74AA servo motor is only 1 component of a complete servo motion system that usually consists of other devices including amplifiers, Allen-Bradley Kinetix drives, encoders, and braking mechanisms. Standard factory designated control options are available on this servo motor.