MPL-B310P-SJ24AA

The MPL-B310P-SJ24AA servo motor is a 460 Volts AC Allen-Bradley MP series servo motor that is designed to offer a rated motor speed of 5000 revolutions per minute. The MP series servo motor features a single-turn high-resolution encoder and it comes with the shaft key but no shaft seal. The MPL-B310P-SJ24AA servo motor features a circular bayonet facing the shaft and it comes with a 24 Volts DC brake. The servo motor is designed innovatively with a small size and a significantly high level of torque. These compact and dynamic servo motors are built to meet the demanding requirements of high-performance motion systems. The MPL-B310P-SJ24AA servo motor should be installed in an area with the recommended environmental conditions. Note that the ambient operating temperature range is 0 to 40 degrees Celsius. For maximum performance, provide the unit with sufficient clearances to allow for the free flow of cooling air. The users can also use the heatsink and airflow for the motor to ensure that it stays within the motor’s recommended operating conditions.

The MPL-B310P-SJ24AA servo motor should be switched off when the users are connecting or disconnecting the motor cables.  In the case of the feedback, power, if the brake cables are connected or disconnected while the power is applied, this might result in arcing or in unexpected motion. The MPL-B310P-SJ24AA servo motor features the high-accuracy EnDat digital encoder option with an interior permanent magnet design. It is ideal for converting, printing, web printing, and material handling applications. Ensure that only authorized technicians are allowed to install or operate the servo motor. The installation manual should be referred to when installing the servo motor to make sure that at least the minimum required conditions are met.