MPL-B310P-SK74AA

The MPL-B310P-SK74AA servo motor is an Allen-Bradley servo motor. It uses premium permanent magnets as its source of rotary motor power. The drive is part of the MP series of servo motors designed by Allen-Bradley. This low-inertia servo motor has a voltage rating of 400 Volts AC. This high-performance brushless servo motor is manufactured to be compact and it can even fit in small factory locations. It can produce high torque for the increased demands of an industrial system. The MPL-B310P-SK74AA servo motor features free mounting holes (Type FF mounting holes) along with the IEC metric mounting flange. It uses SpeedTec DIN connector which can be rotated anywhere within a 180-degree arc. The drive is equipped with a 24 Volts DC brake. The positive air pressure kit is mounted on the feedback connector to provide positive air pressure to further reduce the chances of contamination inside the motor. The drive is certified with the standard IEC 72-1 mounting dimension. The drive has an operating temperature range between 0 and 40 degrees Celsius.

The MPL-B310P-SK74AA servo motor is UL certified and it is also certified with the CSA standards and it has the CE mark. The drive has o board memory which retains the identity of the motor. The communication link in the servo motor automatically reports identity to the system when it is started up. It reduces the commissioning time of the servo motor. The MPL-B310P-SK74AA servo motor runs with a rated speed of 5000 RPM and it has a magnetic stack length of 1 inch. During the installation of the servo motor, all of the connections between the system and the servo motor shaft must be rigid to achieve a good response from the system. The servo motor has high torque to size ratio.