MPL-B320P-MJ22AA

The MPL-B320P-MJ22AA is a Servo motor that is used to implement the desired controlled movement in motion control systems. This motor is a component product of the Kinetix MPL series of low inertia motors that utilizes high energy rare earth magnets for faster acceleration, high torque output with reference to compact size, utilizes SpeedTec DIN connectors for fast, tight and secure connection. Specifically, the MPL-B320P-MJ22AA is a 400 V class motor with 100 mm frame and magnet stack length of 50.8 mm or 2.0 inches. It offers speed up to 5000 rpm with built-in 1024 sin / cos multi-turn absolute encoder for positional feedback. It comes with a shaft key but without a shaft seal installed. Shaft seals are primarily used to prevent process liquids from entering the device. It basically isolates the core of the motor from being damaged by these process liquids. Shaft seals also increase the protection rating of the device. By default, the MPL-B320P-MJ22AA has an IP50 protection but with the use of an appropriate shaft seal and environmentally sealed connectors, up to IP65 / IP66 protection can be attained, allowing this device to be installed in application where liquid splash and liquid jets are existing. The MPL-B320P-MJ22AA is compatible to a variety of Servo drivers, especially, the Kinetix series by Allen-Bradley as well. Compatible servo drivers include Kinetix 5500, Kinetix 5700, Kinetix 6200/6500, Kinetix 6000, Kinetix 300/350, Kinetix 2000, Kinetix 7000. These Servo drives are provided with operating parameters and positional feedback from the built-in encoder of the MPL-B320P-MJ22AA servo motor using Hiperface (Stegmann) protocol.

The MPL-B320P-MJ22AA servo motor is a low-inertia servo motor. It has been designed and manufactured by Allen-Bradley. It is a brushless servo motor and it belongs to the Kinetix MPL series. This servo motor device features premium permanent magnets that power the rotation device and it operates with an input voltage of 400 Volts AC. The servo motor device has a frame size of 100 millimeters and IT comes with a magnetic stack length of 2 inches. The MPL-B320P-MJ22AA servo motor operates at a rated speed of 5000 RPM and it uses an encoder feedback device to relay the running information of the servo motor to the operator. The feedback device used in this servo motor is a multi-turn high-resolution encoder. No shaft key or the shaft seal is present in this servo motor. The drive has a Frame size 3 body. No braking option is included in this servo motor device. The MPL-B320P-MJ22AA servo motor is equipped with an IEC metric flange which can be used for mounting purposes. The servo motor comes with factory designed standard options. The motor drive uses a circular bayonet for connectors and the bayonet faces the shaft. This compact motor device is used to meet the demanding application requirements for high-performance motion systems. The installation of the MPL-B320P-MJ22AA servo motor should be carried out very carefully. The protective frame that is installed on the motor shaft should be properly removed by using a screwdriver. The servo motor installation area should be free from electromagnetic noise. The noise can weaken the performance of the motor. The power transformers in that area should be isolated on all of the AC input power lines. The equipment should be grounded by using a single-point parallel ground system.