MPL-B320P-MJ72AA

The MPL-B320P-MJ72AA is an Allen-Bradley Servo motor. This servo motor is part of the Kinetix MP series of Low Inertia Servo motors that are typically used for implementing motion and position control which is a common requirement in the Factory Automation industry and processes.

Interpreting the MPL-B320P-MJ72AA catalog number, it refers to a servo motor that belongs to the 400V class motors, with nominal supply voltage of 460 VAC, 3-Phase. Additionally, the catalog number indicates that the motor has a magnetic stack which measure 50.0 mm or 2 inches in length. The motor’s rated speed is 5000 RPM and uses a multi-turn high resolution encoder that acts as position feedback. This servo motor comes with a shaft key however, it has no shaft seal. It does not have an integrated 24VDC brake with an IEM metric mounting flange. Additionally, this motor has an output power of 1.5 kW, Rotor inertia of 0.000078 kg-m2 or 0.00069 lb-in.-s2. It has a continuous stall Torque of 3.05 Nm or 27 lb-inches. Similarly, the motor’s Continuous Stall Current is 4.5 Amperes while the Peak Stall Current is 14. Amperes.

This servo motor is equipped with SpeedTEC DIN connectors which permits flexible orientation of connectors and allow utilization of a single cable that is compatible with all MP-Series servo motors. Specifically, the MPL-B320P-MJ72AA utilizes a right-angle connector that can be rotated up to 180 Degrees. The MPL-B320P-MJ72AA also exhibits faster acceleration which is ideal for speed sensitive applications as it is mostly built with rare-earth magnets.

The MPL-B320P-MJ72AA servo motor features the standard factory designated options and it comes with the rated motor speed of 5000 revolutions every minute. The MPL-B320P-MJ72AA servo motor is a 460 Volts AC servo motor and the ambient operating temperature range is 0 to 40 degrees Celsius. The MPL-B320P-MJ72AA servo motor comes with the innovative winding technology that allows the unit to yield 40% higher performance torque compared to the conventional servo motors. The design of the MPL-B320P-MJ72AA servo motor features improved winding insulation material with enhanced thermal management as well as heat transfer. The combination of these factors helps to ensure that the servo motor has a high performance. The Allen-Bradley servo motor features high-energy rare-earth magnets that allow the unit to have fast acceleration. The MPL-B320P-MJ72AA servo motor is a UL recognized servo motor and it comes with components that meet the UL and the CSA standards as well as the CE marking for applicable directives. The MPL-B320P-MJ72AA servo motor features a small design size and a high torque. The Allen-Bradley dynamic brushless servo motors meet the demanding requirements of a high-performance motion system and they also feature the smart motor technology.