Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley MPL Servo Motors MPL-B320P-MJ74AA

Product image is representative; revision or series may vary. Contact us to request a specific version.

MPL-B320P-MJ74AA

|
Need a Specific Revision?

This Allen Bradley MP low inertia synchronous servo is a 100 millimeter frame size. Also, this synchronous servo has a high-resolution multi-turn encoder feedback built in and is equipped with circular DIN (right angle) servo cable connections which are pre-installed on this servo. Additionally, this Allen-Bradley brushless servo motor comes with a speed rating of 5000 rpm. Furthermore, it utilizes 400 volt. This low inertia brushless servo comes with a magnetic stack length of 2 inch.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for MPL-B320P-MJ74AA

ManufacturerAllen Bradley
CategoryMotors
Product LineMPL Servo Motors
Part NumberMPL-B320P-MJ74AA
UPC820919980442
Weight9.00 lbs (4.08 kg)
SeriesPremium permanent magnet rotary servo motor
Series TypeLow-inertia
Voltage Class400 Volts AC
Frame Size100 millimeters
Magnetic Stack Length2 inches
Rated Speed5000 rpm
FeedbackMulti-turn high-resolution encoder
Shaft Key/SealShaft key/no shaft seal
ConnectorsCircular DIN, right angle, 180 degrees rotatable
Brake24 Volts DC brake
Mounting FlangeIEC metric
Factory Designated OptionsStandard
View as PDF
Request a Repair

The Allen-Bradley MPL-B320P-MJ74AA servo motor is a 1.5-kilowatt AC motor rated at 5000 rpm with a 50.8-millimeter magnet stack length and a 100-millimeter frame size. The MPL-B320P-MJ74AA servo motor belongs to the MP series of servo motors from Allen-Bradley which includes motors with up to 8000 rpm in speed ratings and with 0.16 to 18.6 kilowatts of output power. The range of the continuous stall torque for the MP series low-inertia motors is from 0.26 to 163 N-m and the range of the peak stall torque is from 0.74 to 278 N-m. MP series motors can work with the Allen-Bradley Kinetix 6000, Kinetix 300/350, and Kinetix 7000 drives.

The MPL-B320P-MJ74AA servo motor is rated for a peak rpm rating of 5000 rpm. Its output rating is for 1.5 kilowatts and input rating is for 400 Volts AC. For mounting, the type-FF free mounting holes on the IEC metric motor flange can be used. Feedback is provided through the onboard 1024 sin/cos absolute multi-turn encoder (with the hiperface protocol). For braking, an integrated 24 Volts DC brake is provided on the MPL-B320P-MJ74AA servo motor. The MPL-B320P-MJ74AA servo motor includes the standard control options. The servo motor can be connected with a cable to any Allen-Bradley Kinetix series drive. This cable interfaces with the motor through the circular DIN connector on the motor which is 180 degrees rotatable. A shaft key is available on the motor, but a shaft seal is not. The default protection rating of the motor shaft is IP 50. The installation of an optional shaft seal will increase the motor shaft protection rating to the IP 66 level. The motor shaft should never be used for handling or lifting the motor.

Revision Part #Also known as
MPL-B320P-MJ74AA Ser AMPL-B320P-MJ74AA/A, Series A, Rev A
Don't see your particular revision? Contact us now.