Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley MPL Servo Motors MPL-B320P-RK72AA

Product image is representative; revision or series may vary. Contact us to request a specific version.

MPL-B320P-RK72AA

|
Need a Specific Revision?

The Allen-Bradley MPL-B320P-RK72AA MPL series low-inertia servo motor has a frame size of 100 millimeters and it operates with a rated rotor speed of 5000 RPM. This servo motor comes with a 2-pole resolver as an encoder. This motor comes with an IP 66 rated enclosure.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for MPL-B320P-RK72AA

ManufacturerAllen Bradley
CategoryMotors
Product LineMPL Servo Motors
Part NumberMPL-B320P-RK72AA
Weight10.50 lbs (4.76 kg)
Type of ComponentServo Motor
Inertia TypeLow Inertia
Voltage Class400 Volts
Frame Size100 Millimeters
Magnet Stack Length2 Inches
Rated Speed5000 RPM
Feedback2-Pole Resolver
Shaft Key/SealNone
ConnectorCircular DIN, Right Angle, 180-Degrees Rotatable
BrakeNone
Request a Repair

The MPL-B320P-RK72AA servo motor is a low-inertia servo motor that comes in the MPL series by Allen-Bradley. This servo motor is a rotary actuator that uses position feedback to control its motion and final position. The Allen-Bradley MPL-B320P-RK72AA low-inertia servo motor provides precise control of angular and linear device position, velocity, and acceleration. In this servo motor, there is a magnetic stack. These magnets act as the rotor and the magnet stack in this rotor has a length of 2 inches. The Allen-Bradley MPL-B320P-RK72AA low-inertia servo motor operates in the 400 Volts voltage class within the MPL series, and lower or higher voltages must not be applied to this servo motor since the wrong voltage level can cause the motor to malfunction or become damaged.

The Allen-Bradley MPL-B320P-RK72AA low-inertia servo motor comes with a built-in 24 Volts DC rated brake that is made for detecting current and enabling its flow if it is the correct current level for the system. Since the brake is a security part, a different voltage source must be used to power it so that it can operate independently from the servo motor. The Allen-Bradley MPL-B320P-RK72AA low-inertia servo motor comes with a rotatable DIN connector, and this means that the connector housing can be rotated up to 180 degrees in either direction, giving versatility to the servo motor in terms of installation options. The Allen-Bradley MPL-B320P-RK72AA low-inertia servo motor can be installed in different kinds of environments but since it does not include any shaft key or shaft seals, the level of pollution in the environment must be measured to make sure that it will not negatively affect the functioning of the servo motor.