Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley MPL Servo Motors MPL-B320P-SJ24AA

Product image is representative; revision or series may vary. Contact us to request a specific version.

MPL-B320P-SJ24AA

|
Need a Specific Revision?

This AC servo motor made by Allen Bradley (AB) is a 5000 RPM rated VAC motor. It has a shaft key built-in to allow for connecting to this motor. Additionally, this low rotor inertia AC motor is a 100 mm frame size servo motor. Also, this AC synchronous servo motor comes with a length of 2 in. and a 24V DC brake included if braking is needed. This MPL AC synchronous servo motor is a 400 volt class module.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for MPL-B320P-SJ24AA

ManufacturerAllen Bradley
CategoryMotors
Product LineMPL Servo Motors
Part NumberMPL-B320P-SJ24AA
Weight9.00 lbs (4.08 kg)
SeriesPremium permanent magnet rotary servo motor
Series TypeLow-inertia
Voltage Class400 Volts AC
Frame Size100 millimeters
Magnetic Stack Length2 inches
Rated Speed5000 rpm
FeedbackSingle-turn high-resolution encoder
Shaft Key/SealShaft key/no shaft seal
ConnectorsCircular bayonet, facing shaft
Brake24 Volts DC brake
Mounting FlangeIEC metric
Factory Designated OptionsStandard
View as PDF
Request a Repair

The MPL-B320P-SJ24AA servo motor from the Allen-Bradley MP-series is an AC servo motor rated at 5000 rpm and 1.5 kilowatts. The motor is manufactured with premium permanent magnets and it belongs to the Allen-Bradley MP-series of low-inertia synchronous motors. To avoid injury or damage to the motor, the MPL-B320P-SJ24AA servo motor should not be lifted or handled by the motor shaft. This is because the cap on the shaft can loosen causing the motor to be dropped. When the shipment of the servo motor is received, the servo motor should be carefully removed from the shipping container and it should then be inspected for damage. The mounting pilot, the front of the output shaft, and the motor frame should be examined for any anomalies.

The MPL-B320P-SJ24AA servo motor operates at an input voltage of 400 Volts AC. The peak motor speed is 5000 rpm. A 24 Volts DC motor brake is integrated into the motor. The motor mounting flange type is the IEC metric type. Additional motor features include a 1024 sin/cos absolute single-turn encoder (with Hiperface protocol support), a shaft key, and a DIN connector. The motor frame size is 100 millimeters. The stack length for the magnet is 50.8 millimeters. The motor does not include an integrated shaft seal. The MPL-B320P-SJ24AA servo motor comes with standard control options and it weighs 3.7 kilograms. The maximum stall torque rating is 70 pounds on an inch while the continuous stall torque rating is 27 pounds on an inch. The rotor inertia is rated at 0.00069 lb-in-s2. The industrial applications for which the MPL-B320P-SJ24AA servo motor is suitable include automotive, material handling, and packaging applications. The MPL-B320P-SJ24AA servo motor can be used with the Allen-Bradley Kinetix 7000, Kinetix 6000, and Ultra3000 series of drives.

Revision Part #Also known as
MPL-B320P-SJ24AA Ser AMPL-B320P-SJ24AA/A, Series A, Rev A
Don't see your particular revision? Contact us now.