MPL-B330P-HJ72AA

Manufactured by Allen-Bradley, the MPL-B330P-HJ72AA servo motor is an MP series servo motor. This Allen-Bradley low-inertia servo motor is built with an armature voltage of 460 Volts AC and a 100-millimeter frame size. The magnetic stack length is 3 inches or 76.2 millimeters. The speed rating for the MPL-B330P-HJ72AA servo motor is 5000 revolutions per minute and the unit features the 2000-line incremental encoder feedback module with the keyed shaft extension as the enclosure. The MPL-B330P-HJ72AA servo motor is a no-brake servo motor. This Allen-Bradley MP series servo motor comes with the SpeedTec DIN, right-angle, 180-degree rotatable connector. It is designed with an innovative winding technology and it yields up to 40% higher torque when compared to other servo motors. The MPL-B330P-HJ72AA servo motor also comes with smart motor technology and it is a high-performance feedback servo motor.  The unit features an onboard memory that is designed to allow it to retain the motor identity.

For servo motor longevity, ensure that the MPL-B330P-HJ72AA servo motor is installed by qualified technicians who are familiar with the Allen-Bradley servo motors. The MPL-B330P-HJ72AA servo motor also comes with a mounting pilot that is useful for aligning the servo motor on the machine. Make sure to use the stainless steel fasteners to safely hold the servo motor in the correct position. The installers should make sure to comply with the local regulations and the relevant equipment and motor installation guidelines. Before loading the MPL-B330P-HJ72AA servo motor, make sure that it is properly mounted because disconnected mechanical connectors or loose shaft keys can cause injury. Thus, prior to powering up the unit, remove the shaft key and the mechanical connectors that could fall off the motor shaft.