MPL-B330P-HK74AA

The Allen-Bradley MPL-B330P-HK74AA servo motor is a low-inertia servo motor that is meant to be used in different applications that require high performance and precision during operations. These applications include packaging, converting, and electronics assembly applications. This servo motor is manufactured in the MPL series by Allen-Bradley/Rockwell Automation. The Allen-Bradley/Rockwell Automation MPL-B330P-HK74AA low-inertia servo motor comes with a high-performance encoder that provides precise device position detection feedback that is key for precise operation. This encoder is a 2000 line encoder that performs up to 2 million counts per revolution. This servo motor operates at up to 5000 RPM and it requires a voltage rating of 400 Volts. It also comes with a built-in holding brake for measuring the incoming current and determining whether or not the current should be sent to the servo motor. This brake requires 24 Volts DC voltage from a power source that is separate from the servo motor.

The Allen-Bradley/Rockwell Automation MPL-B330P-HK74AA MPL series low-inertia servo motor employs a new technology that uses onboard memory for retaining motor identity and for reducing the system commissioning time. The windings of this servo motor have also been upgraded to a material that enables them to release heat faster than older servo motor windings could. These windings can also reach higher levels of torque in less time than the older windings were capable of. The Allen-Bradley/Rockwell Automation MPL-B330P-HK74AA low-inertia servo motor supports a maximum environmental protection rating of IP 66 if an optional shaft key and shaft seal are installed. Without an optional shaft key or shaft seal, the Allen-Bradley/Rockwell Automation MPL-B330P-HK74AA low-inertia servo motor has an environmental protection rating of IP 50. It uses permanent magnet technology and it has an internal magnet stack length of 3 inches.