MPL-B330P-MJ22AA

The servo motor with catalog number MPL-B330P-MJ22AA is part of the MP series, low inertia servo motor that is manufactured by Allen-Bradley. This servo motor has a compact and small assembly that is capable of implementing motion and position control by monitoring the rotation of the motor using a pre-installed feedback from an encoder. The instrument’s compact design allows the servo motor to be used in applications with minimum installation space available.

The MPL-B330P-MJ22AA is a servo motor that is also part of the Smart motor technology as this motor is equipped with an onboard memory that is used to retain the motor ID. Additionally, it has a communication link to allow the motor ID to be access through the communication via a specified protocol. When installed with Kinetix servo motor drives, this motor is capable of being locally configured and controlled as well as remotely accessed and operated by means of Programmable Logic Controllers (PLC), Human Machine Interface (HMI) and Supervisory Control and Data Acquisition (SCADA). There are a variety of compatible Kinetix drives for use with the MPL-B330P-MJ22AA including the Kinetix 5500, Kinetix 5700, Kinetix 6200/6500, Kinetix 6000, Kinetix 300/350, Kinetix 2000, and Kinetix 7000.

The MPL-B330P-MJ22AA is ideal for use in most applications that require speed control. Specifically, it is compatible with Packaging, Converting, Material handling, Electronic assembly, and Automotive applications. A shaft seal may be added to this servo motor to increase the protection rating. By default, the standard environment rating of this servo motor is IP55 however, when a shaft seal kit is installed, IP66 rating is met.

It also has a power output rating of 1.80 kilowatts, and a peak torque rating of 98 pounds on an inch at 19 Amps of input current. The MPL-B330P-MJ22AA servo motor has a rare-earth magnet rotor which guarantees high acceleration over a short period of time, and it also comes with state-of-the-art smart motor technology, which offers an onboard motor memory module that is capable of retaining the motor identity and transferring this identity on startup. The MPL-B330P-MJ22AA servo motor is fitted with a multi-turn type of encoder which provides high-resolution absolute feedback and it requires no battery, and it is designed with a refined winding insulation material which enhances heat transfer, thereby improving motor performance. This motor has an IEC rated frame with a 100 millimeters frame size, and a magnetic stack length of 3 inches, and it also has a shaft key with no shaft seal. The MPL-B330P-MJ22AA servo motor has a circular DIN connector which offers flexible orientation, and like all of the MP series low-inertia motors, it supports the single cable family that is supported by every motor in the series. The MPL-B330P-MJ22AA servo motor has an ambient operating temperature range of 0 to 40 degrees Celsius and is designed for use at a non-condensing 5 to 95% relative humidity range.