MPL-B330P-MJ24AA

The Allen-Bradley MPL-B330P-MJ24AA is a brushless AC synchronous motor type. It is a servo motor that belongs to the MPL series of low inertia servo motors. This servo motor is driven by servo drives from the same control platform, the Kinetix rotary motion control system. It is compatible to be driven by Kinetix Serco drives such as Kinetix 5500, Kinetix 5700, Kinetix 6200/6500, Kinetix 6000, Kinetix 300/350, Kinetix 2000 and Kinetix 7000. The MPL-B330P-MJ24AA is suitable for use in a wide variety of application in different industries. It is especially designed for Packaging, Converting, Material handling, Electronic assembly, Automotive application and similar requirements. This motor is installed with a high resolution absolute encoder that supports Hiperface protocol for digital communication between the servo drive and the motor. For secure and fast connection, it uses the SpeedTec DIN connector in right angle orientation that locks to the termination point via quarter turn. This connector is also 180o rotatable to for connection and orientation flexibility. When installing this motor, it is important to route connection beneath the motor to create a drip loop. This loop prevents liquids from going to the connection point of the motor and lowers the risk of damage to the component. As the MPL-B330P-MJ24AA come with an integral 24 VDC holding brake. This holding brake provides dynamic braking capability however, must not be used for stopping motor shaft rotation and not as safety braking mechanism. It is primarily used to maintain the motor shaft at 0 rpm up to the rated brake holding Torque.

The MPL-B330P-MJ24AA servo motor from Allen-Bradley is part of the low-inertia MP series of AC motors that is designed for industrial applications that include automotive and converting applications. The MPL-B330P-MJ24AA servo motor is a brushless AC motor which operates at an input voltage of 400 Volts AC. It comes with all of the standard factory options. This servo motor can be used with several series of drives from Allen-Bradley, including the Kinetix 7000, Kinetix 6000, and Kinetix 2000 drives. The use of the motor with Kinetic 5500 series drives requires the use of the Allen-Bradley 2198-H2DCK Hiperface protocol and the DSL feedback converter kit. Similarly, use of the motor with Allen-Bradley Kinetix 5700 series drives requires the Allen-Bradley 2198-K57CK-D15M universal feedback connector kit. The rated speed of the MPL-B330P-MJ24AA servo motor is 5000 rpm. Additional drive features include a 24 Volts DC brake, a 1024 sin/cos absolute multi-turn encoder with Hiperface protocol support, and a shaft key. The specifications of the brake are a holding torque rating of 4.18 N-m, a coil current range of 0.45 to 0.55 Amps, a release response time of 50 milliseconds, and a weight of 12.4 pounds. A shaft key is not provided. The motor connects to drives through the SpeedTec DIN connectors. The frame size of the MPL-B330P-MJ24AA servo motor is 100 millimeters and the magnet stack length is 76.2 millimeters. The power rating at the output is 1.8 kilowatts. The continuous and peak stall torques are 4.18 N-m and 11.1 N-m, respectively. The mounting flange type for the servo motor is the IEC metric (type FF). The environmental protection rating of the motor is the IP 50 rating.