MPL-B330P-MK24AA

The Allen-Bradley MPL-B330P-MK24AA multi-turn encoder servo motor comes enclosed in an IP 50 housing. This housing protects the motor against solid particles that might enter it and affect its functioning. The servo motor also comes with a shaft seal or a key that protects the motor against water jets. This shaft seal, when it is installed, must be periodically inspected in order to replace it when necessary and maintain the security and reliability of operations and of the motor itself. The MPL-B330P-MK24AA servo motor does not include a shaft key or seal by default, but these features can be chosen from the Allen-Bradley catalog and once they are installed, they will improve the protection level provided by the motor’s enclosure. It is also recommended to use shields in order to protect this enclosure, the shaft, and the connections and wirings of the motor.

The Allen-Bradley MPL-B330P-MK24AA multi-turn encoder servo motor can operate in an environment that has a temperature range of 0 to 40 degrees Celsius. It is important that humidity levels are maintained between 0 and 95% and that the operating altitude is below 1000 meters above sea level. This motor requires clearances between itself and nearby equipment in order to release heat properly. The cables and wirings must be kept as short as possible and these should be filtered. The motor must be included in a grounding system in order to reduce electrical noise. Electrical noise can mislead or interfere with signals, and this is why it should be avoided. The Allen-Bradley MPL-B330P-MK24AA multi-turn encoder servo motor operates with a voltage of 400 Volts AC and its frame size is 100 millimeters.