Free UPS Ground on All Orders!
+1 (919) 205-4392
Allen Bradley MPL Servo Motors MPL-B330P-SJ22AA

Product image is representative; revision or series may vary. Contact us to request a specific version.

MPL-B330P-SJ22AA

|

This permanent magnet servo motor built by Allen-Bradley has a RPM rating of 5000 revolutions per minute. It is equipped with a single turn encoder feedback and comes with bayonet servo cable connections that are part of this brushless servo motor. It uses 400V power to turn. Furthermore, it also is a 100 mm frame servo. This AC servo has a shaft key, with no shaft seal installed to allow for connecting to this motor.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for MPL-B330P-SJ22AA

ManufacturerAllen Bradley
CategoryMotors
Product LineMPL Servo Motors
Part NumberMPL-B330P-SJ22AA
Weight9.94 lbs (4.51 kg)
SeriesPremium permanent magnet rotary servo motor
Series TypeLow-inertia
Voltage Class400 Volts AC
Frame Size100 millimeters
Magnetic Stack Length3 inches
Rated Speed5000 rpm
FeedbackSingle-turn high-resolution encoder
Shaft Key/SealShaft key/no shaft seal
ConnectorsCircular bayonet, facing shaft
BrakeNo brake
Mounting FlangeIEC metric
Factory Designated OptionsStandard

The Allen-Bradley MPL-B330P-SJ22AA brushless servo motor without a 24 Volts DC brake is a high-output, low-inertia servo motor with a premium rare-earth magnetic rotor that is built to meet the demanding needs of high-performance motion systems. The MPL-B330P-SJ22AA servo motor is part of the MP series of motors and it comes with innovative winding technology that is designed to offer up 40% additional torque yields compared to conventional motors, and it also has an improved heat transfer mechanism for maximum performance. The MPL-B330P-SJ22AA servo motor has a winding torque rating of 37 pounds on an inch and a continuous current rating of 6.1 Amps. It has a nominal voltage rating of 460 Volts AC, and an output power rating of 1.8 kilowatts.

The MPL-B330P-SJ22AA servo motor has a single-turn type high-resolution encoder option which provides up to 2 million counts per revolution for smooth and precise control. For higher and quick acceleration, the MP series low-inertia motors, including the MPL-B330P-SJ22AA servo motor, are fitted with premium rare earth magnets which distinguishes them from conventional servo motors. The MPL-B330P-SJ22AA servo motor has 3-inch magnet stack length, with a frame diameter of 100 millimeters, and an IP 51 enclosure rating. It has a SpeedTEC circular bayonet type of connector with a flexible cabling orientation and a horizontal shaft with a shaft key option. The MPL-B330P-SJ22AA servo motor has an operating temperature range of 0 to 40 degrees Celsius (32 to 104 degrees Fahrenheit) and a non-condensing operating humidity range of 5 to 95%. It has CSA, CE, and UL certifications, and it can be stored at a temperature range of -30 to 70 degrees Celsius (-22 to 158 degrees Fahrenheit).

Revision Part #Also known as
MPL-B330P-SJ22AA Ser AMPL-B330P-SJ22AA/A, Series A, Rev A
Don't see your particular revision? Contact us now.