MPL-B430P-HK72AA

The Allen-Bradley MPL-B430P-HK72AA servo motor is an advanced MPL series servo motor. It is a low-inertia type of servo motor and it is part of the Allen-Bradley MPL series. The frame size of the MPL-B430P-HK72AA servo motor is 115 millimeters. This servo motor uses permanent magnets that are arranged in a stack. The magnet stack length refers to the length of the magnet stack which is used to lend rigidity to the motor stator and the magnet stack length of the MPL-B430P-HK72AA servo motor is 76.2 millimeters or 3 inches. The motor winding in this servo motor is designed for 400 Volts AC voltage. The feedback that the MPL-B430P-HK72AA servo motor uses is provided by a built-in incremental encoder that is capable of 2000 lines of feedback per revolution.

The Allen-Bradley MPL-B430P-HK72AA MPL series servo motor does not include a holding brake like some of the other MPL series servo motors do. It also does not have a shaft seal kit. Shaft seals for this servo motor are made of nitrile and the kits also come with a lubricant that reduces wear. The default environmental protection rating of the MPL-B430P-HK72AA servo motor is IP 50. This rating is for the motor specifically when it has the motor shaft pointing upwards. The rating can be increased by changing the motor orientation or by installing an optional shaft seal. If the MPL-B430P-HK72AA servo motor is installed with a horizontal shaft, it  has an IP 51 protection rating and the motor with the shaft pointing downwards has an IP 53 protection rating. If the optional shaft seal kit is used, then the protection rating of the motor increases to IP 66. The rated rotor speed of the motor is 5000 RPM. The motor is mounted with an IEC metric flange. The motor has circular DIN connectors that are 180-degrees rotatable.