MPL-B430P-RJ74AA

The Allen-Bradley MPL-B430P-RJ74AA servo motor is a small electrical motor that supplies power to a servo mechanism. A servo motor converts an electrical signal into an equivalent mechanical system. The Allen-Bradley MPL-B430P-RJ74AA servo motor has precise and flexible positioning and it excels at speed control. The low-inertia servo motor runs with 400 Volts AC supply voltage.  The frame size of the motor is 115 millimeters. The ability of the motor to adjust to differences between the motion profile and feedback signals depends greatly upon the type of controls and servo motors that are used. The MPL-B430P-RJ74AA servo motor is equipped with a shaft key. The output shaft of the servo motor can be positioned into a specific angular position by sending a coded signal to a servo. The rated speed of the motor is 5000 rpm. Both the position and velocity of the shaft can be measured in the servo motor. Servo motors are used in various applications such as robotics, CNC machinery or automated manufacturing applications. A 2-pole resolver feedback device is equipped on the servo motor and so is a 24 Volts DC brake.

The MPL-B430P-RJ74AA servo motor has a high torque to size ratio. The motor is powered with smart motor technology. The feedback connector is equipped with a positive air pressure kit. It also reduces the chance of damage inside the servo motor. This servo motor is not water-resistant and it should be used for indoor purposes only. An additional shaft seal can be used on the servo motor. It is a 3-phase device. The MPL-B430P-RJ74AA servo motor works with pulse modulation. The servo motor uses low-profile field-reversible motor connectors which have minimal servo motor impact on the overall machine design. Electromagnetic interference can affect the running performance of the MPL-B430P-RJ74AA servo motor so the servo motor should be kept away from such interference.