MPL-B430P-SJ74AA

The MPL-B430P-SJ74AA MP-Series Low-Inertia High Output Brushless Servo Motor by Allen-Bradley is a 400V low inertia premium permanent magnet rotary servo motor with a default 500 rpm base speed used in a wide range of high-performance motion systems. The brushless motor has a frame size of Size 4 (115mm (4.53in)), with a magnetic stack length of 76.2mm (3in), and it has a factory default motor speed of 5000rpm. It is designed with the single-turn high-resolution encoder (1024 sin/cos, absolute encoder (Hiperface protocol)), which has an 8-15-bit resolution (256-32768 counts per revolution), with either the open collector, TTL, push-pull or the SSI outputs, and a reverse polarity protection. It has an armature voltage rating of 460V, and a rated motor output of 2.2kW, with 0.00038kg/m2 (0.0033b•in•s2) rotor inertia.

The MPL-B430P-SJ74AA has a 24V DC brake option with a holding torque of 10.2N•m, at 0.576-0.704A coil current, and a brake response time of 110ms. It has a load force rating of 106Kg at 500rpm, 55Kg at 3500rpm, and a maximum of 49Kg at 5000rpm, and also with a load axial force rating of 52Kg at 500rpm, 22Kg at 3500rpm, and of 19Kg at 5000rpm. The motor has a keyed shaft extension enclosure, with an IEC metric flange mounting option, and it uses a circular DIN, right angle, 180o rotatable connector. it has an operating temperature of 32-104 oF, at a 5-95% non-condensing relative humidity, and it is stored at a non-corrosive range of -22-158 oF. It weighs about 5.5Kg (12lb), with dimensions of 140.1mm x 215mm x 98.3mm and it is UL, CE, CSA, c-UL, and KCC-certified.