Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley MPL Servo Motors MPL-B430P-SK74AA

Product image is representative; revision or series may vary. Contact us to request a specific version.

MPL-B430P-SK74AA

|
Need a Specific Revision?

The Allen Bradley (AB) MPL-B430P-SK74AA synchronous servo comes with a RPM rating of 5000 rpm. Furthermore, this unit has circular DIN (180 degrees rotatable) servo cable connections which are included on this high quality motor. Additionally, this synchronous servo has no a no shaft key installed. This permanent magnet motor has a single Turn (hyperface protocol) encoder installed in the rear of the motor and is a 400 VAC class module. Also, this low rotor inertia compact brushless servo motor has a braking feature included for braking applications.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for MPL-B430P-SK74AA

ManufacturerAllen Bradley
Product TypeLow-Inertia Servo Motor
Product LineMPL Servo Motors
Part NumberMPL-B430P-SK74AA
UPC820919981029
Weight20.00 lbs (9.07 kg)
SeriesMP
Series TypeLow Inertia
Voltage Class400V
Frame Size115 mm
Magnetic Stack Length3 in.
Rated Speed5000 rpm
FeedbackSingle-turn High-resolution Encoder
Shaft Key/SealNo Shaft Key/No Shaft Seal
ConnectorsCircular DIN, Right Angle, 180 Rotatable
Brake24V DC Brake
Mounting FlangeIEC Metric
Factory Designated OptionsStandard
View as PDF
Request a Repair

The MPL-B430P-SK74AA low-inertia servo motor by Allen-Bradley is a low-inertia, high-output brushless servo motor for use in industrial applications for delivering significantly higher torque than usual. The motor offers a high torque to size ratio with low inertia and it has a default motor speed of 5000rpm. The motor has a single-turn high-resolution feed-back encoder (1024 sin/cos, an absolute encoder (Hiperface protocol)), with 15-bit resolution (256-32768 counts per revolution), and with an open collector, TTL, push-pull, or the SSI outputs. It offers reverse polarity protection, and it has an armature voltage rating of 460V, with a motor output power of 2.2kW, and 0.00038kg/m2 (0.0033b•in•s2) of motor rotor Inertia.

It has a 24V DC brake option, with 10.2N•m holding torque, a coil current of 0.576-0.704A coil current, and a minimum brake response time of 110ms. The MPL-B430P-SK74AA has 106Kg of load force at 500rpm, 55Kg at 3500rpm, and 49Kg at 5000rpm, and with 52Kg load axial force rating at 500rpm, 22Kg at 3500rpm, and 19Kg at 5000rpm. It has a keyless shaft extension enclosure, with an IEC-rated metric flange mounting option, and it has a circular (SpeedTec) right angle, 180o rotatable DIN connector. The MPL-B430P-SK74AA has a working temperature range of 32-104 oF, at a relative humidity between 5 and 95%, without condensation, and it is built for storage at an ambient temperature between -22 and 158 oF. The motor weighs approximately 5.5Kg (12lb), with a total area of 140.1mm x 215mm x 98.3mm and it is CSA, UL, CE, KCC, and CUL-certified.

Revision Part #Also known as
MPL-B430P-SK74AA Ser AMPL-B430P-SK74AA/A, Series A, Rev A
Don't see your particular revision? Contact us now.