MPL-B4520P-HK22AA

The MPL-B4520P-HK22AA servo motor from Allen-Bradley is a low-inertia MP series servo motor. It has a speed rating of 5000 rpm and an input rating of 400 Volts AC. The servo motor comes with a standard IEC metric flange. Important features of the MP series servo motors are smart motor technology, low rotor inertia, and high torque-to-size ratio. The MPL-B4520P-HK22AA servo motor comes with a frame size of 130 millimeters. The magnet stack length for the MPL-B4520P-HK22AA servo motor is 50.8 millimeters. An integrated incremental encoder provides 2000 lines per motor revolution. The servo motor can connect with compatible Allen-Bradley drives through a circular bayonet connector. Compatible drives include drives from the Allen-Bradley Kinetix 6000, Kinetix 2000, and Ultra 3000 series.

Any unused MPL-B4520P-HK22AA servo motors should be kept in an environment with a temperature between -30 and 70 degrees Celsius and a relative humidity between 5 and 95%. For optimal operation, the temperature of the air around a loaded MPL-B4520P-HK22AA servo motor should be between 0 and 40 degrees Celsius. Since a shaft seal is not available on the MPL-B4520P-HK22AA servo motor, its environmental protection rating is IP 50. If the optional shaft seal kit is installed on the motor and environmentally sealed cable connectors are used, the environmental protection rating improves to IP 66. The catalog number of the Allen-Bradley shaft seal kit for the MPL-B4520P-HK22AA servo motor is MPL-SSN-A5B5. Because shaft seals are subject to wear and tear, it is recommended to periodically inspect them and replace them if required. It is recommended to replace the shaft seals once every 3 months. The shaft seal should be replaced every at least 12 months. A shaft key and a motor brake are not available on the MPL-B4520P-HK22AA servo motor.