Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley MPL Servo Motors MPL-B4520P-MJ22AA

Product image is representative; revision or series may vary. Contact us to request a specific version.

MPL-B4520P-MJ22AA

|
Need a Specific Revision?

The Allen-Bradley MPL-B4520P-MJ22AA servo motor is an MPL series servo motor. It has a frame size of 130 millimeters. The MPL-B4520P-MJ22AA servo motor has a rated speed of 5000 RPM.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for MPL-B4520P-MJ22AA

ManufacturerAllen Bradley
Product TypeServo Motor
Product LineMPL Servo Motors
Part NumberMPL-B4520P-MJ22AA
Weight15.00 lbs (6.80 kg)
MountingFlange Mounting
Protection RatingIP 50
Voltage400 Volts
Operating Temperature32 to 104 degrees Fahrenheit
FeedbackEncoder
Rated Speed5000 RPM
ConnectorCircular Bayonet Connector
Frame Size130 Millimeters
Shaft SealNone
Request a Repair

The Allen-Bradley MPL-B4520P-MJ22AA servo motor is an MPL series servo motor that can operate with several Kinetix series drives. The MPL series servo motors like the MPL-B4520P-MJ22AA servo motor are compatible with the Allen-Bradley Kinetix 5700, 5500, 5100, 5300, 6500, and 6000 series servo drives. The MPL servo motors are highly-dynamic brushless servo motors that are designed for high performance motion control systems. The environmental specifications for MPL motors like the MPL-B4520P-MJ22AA servo motor include a 32 to 104 degrees Fahrenheit operating temperature range, and a -22 to 158 degrees Fahrenheit storage temperature range. The MPL-B4520P-MJ22AA servo motor’s environmental protection rating is IP 50, and this means that it has limited protection from dust and no protection from liquids.

Mounting the Allen-Bradley MPL-B4520P-MJ22AA MPL series servo motor with the shaft pointing down improves the motor’s environmental protection rating to IP 53, which means that the motor will be protected against direct sprays of water at up to a 60-degree angle from the vertical. The rated rotor speed of the MPL-B4520P-MJ22AA servo motor is 5000 RPM. Integrated features that are available on this servo motor include a multi turn encoder, bayonet connectors, an IEC metric flange, and a shaft with a key. The 1024 sin/cos encoder supports the Hiperface protocol. The motor shaft does not include a protective seal and the motor does not have a holding brake. A holding brake, if required, has to be ordered separately and installed. The motor frame size is 130 millimeters and its permanent magnet stack length is 2 inches. The input voltage rating of the MPL-B4520P-MJ22AA servo motor is 400 Volts AC.