MPL-B4520P-MJ24AA

The Allen-Bradley MPL-B4520P-MJ24AA servo motor is an advanced MPL series servo motor. It is a flange-mounted device and it includes an IEC-metric flange. The motor shaft includes a key but not a shaft seal. A motor shaft seal kit can be ordered separately for field installation if an application requires it. Motor shaft seals are constructed from nitrile and the kits include a lubricant that reduces wear and tear. Allen-Bradley recommends the replacement of shaft seals every 3 months or at least every 12 months. The power connector on the MPL-B4520P-MJ24AA servo motor is a circular bayonet connector that faces the motor shaft. A holding brake is available on the MPL-B4520P-MJ24AA servo motor. The brake has a voltage rating of 24 Volts DC.

The frame size and magnet stack length of the Allen-Bradley MPL-B4520P-MJ24AA MPL series servo motor are 130 millimeters, and 50.8 millimeters (2 inches), respectively. The motor operates at 400 Volts AC and has a maximum rated rotor speed of 5000 RPM. A 1024 sin/cos absolute multi turn encoder with Hiperface protocol support is available on the MPL-B4520P-MJ24AA servo motor. Proper maintenance can increase the operating life of this servo motor. Allen-Bradley recommends providing a drip loop on all the cables that connect to the motor because this will help to ensure that liquids are carried away from the motor connections. Shields should also be used if possible to protect the motor housing from foreign matter. The motor and all the seals should be inspected periodically for damage. Only properly trained and experienced personnel should be tasked with motor installation and maintenance for the MPL-B4520P-MJ24AA servo motor.