MPL-B4520P-SJ22AA

The MPL-B4520P-SJ22AA servo motor is a high-performance servo motor system that is widely used as an alternative to stepper motor devices. Servo motors are often used to control machine position by using the built-in presets. The input voltage required for the motor is 400 Volts AC. The motor runs with 5000 rpm of speed and it generates 2.5 kilowatts of power. The servo motor has a continuous peak current of 8.5 Amps. The MPL-B4520P-SJ22AA servo motor has a fluctuating frequency between 0 and 334 Hertz. The frequency rating of the motor is directly dependent on the applied load. This servo motor variant is a brushless AC synchronous motor device. It uses a single-turn encoder feedback device. The servo motor is widely used in the packaging, printing, and material handling industries. The motor has been certified with different environmental, health, and safety standards including the CE, CSA, and the UL standards. The servo motor is not waterproof and it should be used in an indoor location only. The motor installation should be done in a clean and dry environment.

The MPL-B4520P-SJ22AA servo motor has no braking system. It controls the torque, speed, and position of a bigger machine. This servo motor has the ability to deliver high levels of torque and high levels of efficiency to meet different tough application needs. The servo motor is manufactured with a compact design which helps the servo motor to deliver higher levels of torque. The MPL-B4520P-SJ22AA servo motor is equipped with a shaft key. The key prevents relative rotation between 2 parts and it enables torque transmission. The shaft and the rotating machine use a keyway which is a slot and pocket in which the key fits. Shafts are mostly used to transmit revolving motion and torque from 1 point to another point in a machine system.