MPL-B4530F-HJ72AA

The Allen-Bradley MPL-B4530F-HJ72AA servo motor is a servo motor with standard factory designated options. The armature voltage requirement of this servo motor is 400 Volts AC. This low-inertia brushless servo motor has a frame size of 130 millimeters (5.12 inches). The servo motor has a magnetic stack length of 30. When working with regular load, the motor rotates with a rated speed of 3000 rpm. The servo motor uses a 2000-line incremental encoder for real-time feedback. This device sends a feedback signal which can be used to find the speed, position, count, and the rotation direction of a device. A control device can use the feedback signal to send a command for a particular function. The MPL-B4530F-HJ72AA servo motor uses a keyed shaft extension but it lacks a shaft seal that would give added protection. An IEC metric flange is equipped in this servo drive to mount it in various locations. A circular DIN connector capable of 180-degree rotation is used in this servo motor variant. The motor has the Type FF free mounting holes.

The MPL-B4530F-HJ72AA servo motor should be kept away from devices which radiate heat. Electromagnetic interference should also not be present in the installation area. This interference can reduce the performance of the servo motor by inducing stray signals. To reduce electromagnetic interference, wire lengths should be kept as short as possible. Both ends of the encoder cable should be grounded and the signal wire pairs should be twisted. The MPL-B4530F-HJ72AA servo motor complies with the UL and CE requirements and it offers protection as stated in the EN 60529 standards. The motor has a minimum operating temperature rating of 0 degrees Celsius and a maximum operating temperature rating of 40 degrees Celsius. With the CE rating, the motor can be used in different regions, including Europe.