MPL-B4530F-MK72AA

The MPL-B4530F-MK72AA servo motor is an Allen-Bradley manufactured servo motor. These servo motors are intended to drive larger machine systems. It is manufactured with premium rare-earth permanent magnets. The motor is powered with 400 Volts AC of armature voltage. It is a 3-phase device and consumes power from a 3-phase source. This servo motor must be part of a controlled system which includes a transistorized electronic amplifier to operate properly. The MPL-B4530F-MK72AA servo motor should not be used with a direct connection to the power supply. The motor has a magnetic stack length of 3 inches and it also has a rated speed of 3000 rpm. A multi-turn high-resolution encoder feedback device is used on this servo motor. The feedback obtained from the servo motor is very useful in making quick decisions in an industrial setting. It belongs to the Series A of the MPL servo motors manufactured by Allen-Bradley. The motor has a frequency rating between 0 and 200 Hertz.

The MPL-B4530F-MK72AA servo motor requires an operating temperature between 0 and 40 degrees Celsius in an indoor setting. Special care should be taken during the installation and operation of the servo motor to keep it safe and in proper running condition. It should be kept away from water splashes unless it has been waterproofed by installing an additional shaft seal. The shaft seal comes with an IP 66 protection rating if it is used. With the added shaft seal, the servo motor is protected against water sprays from all directions. The MPL-B4530F-MK72AA servo motor comes with a constant stall torque rating of 8.25 N-m. A braking system does not come with this servo motor. It is a low-inertia servo motor which can handle tough application requirements with ease.