MPL-B4530F-MK74AA

The MPL-B4530F-MK74AA servo motor is a low-inertia MPL series servo motor manufactured by Allen-Bradley. This low-inertia servo motor is a high-performance motor that comes in a compact frame size with brushless architecture and high torque density. The premium permanent magnets integrated in its rotor are designed to yield the highest available torque-to-inertia ratios. The MPL-B4530F-MK74AA servo motor is a rugged and cost-efficient servo motor that comes with a frame size of 130 millimeters, and it provides a continuous rated torque of 73 pounds on an inch and a peak torque of 180 pounds on an inch. It comes with a standard IP 50 rated enclosure and it has UL, CE, and CSA certifications, which ensures that the servo motor can be used internationally. The sturdy brushless construction of the motor eliminates inertia ensures its suitability for use in demanding industrial applications.

The Allen-Bradley MPL-B4530F-MK74AA MPL series servo motor is a smart servo motor that uses “smart motor technology” which enables its on-board memory to retain its identity for a reduced start-up time. This MPL series servo motor is equipped with an absolute multi-turn 1024 Sin/Cos encoder with the HIPERFACE protocol for feedback. The 19-pin feedback connector feeds the motor data to the compatible Allen-Bradley Kinetix servo drives that it is connected to. The MPL-B4530F-MK74AA servo motor employs an M23 feedback connector, which is a 180-degree rotating SpeedTEC-ready DIN connector designed to provide a simple one-quarter turn connection. The SpeedTEC DIN connector conforms with a wide range of global industrial standards such as the UL, RoHS, and NFPA 79 standards. The MPL-B4530F-MK74AA servo motor comes with a holding brake with a 24 Volts DC voltage rating. The holding brake has a holding torque rating of 10.2 N-m and coil current rating of 0.576 to 0.704 Amps.