MPL-B4530F-SJ22AA

The Allen-Bradley MPL-B4530F-SJ22AA servo motor is a 3000 rpm-rated AC servo motor which forms part of the MP series of low-inertia servo motors. Motors from the MP series support a wide range of speeds with a maximum rated speed of 8000 rpm. Suitable applications for this motor family include automotive and material handling. When the servo motor arrives, the nameplate catalog number of the MPL-B4530F-SJ22AA servo motor should be checked against the order that has arrived. Lifting the servo motor by the shaft can cause it to fall, therefore handling the servo motor by the motor shaft should be avoided to prevent personal injury and motor damage. The shipper should be notified immediately if the servo motor is the wrong model or if the motor frame, shaft, or mounting pilot are damaged.

The MPL-B4530F-SJ22AA servo motor is designed for operation at 400 Volts AC. The output speed and power ratings are 3000 rpm and 2.1 kilowatts, respectively. The continuous and peak stall torque ratings are 8.25 N-m and 20.3 N-m, respectively. The magnet stack length is 76.2 millimeters. The frame size of the MPL-B4530F-SJ22AA drive is 130 millimeters. The integrated servo motor features include a 1024 sin/cos absolute multi-turn encoder, a shaft key, and a circular bayonet connector for drive interfacing. The encoder supports the hiperface protocol. Features that are not available on the MPL-B4530F-SJ22AA servo motor include a shaft seal and a motor brake. Both of these features are available as additional options from Allen-Bradley. The shaft seal kit helps to reduce wear and tear and improves the protection rating from IP 50 to IP 66 if it is installed on the servo motor.  FF-type free mounting holes are available on the if installed on the servo motor’s IEC metric motor flange.