MPL-B4530F-SK72AA

The MPL-B4530F-SK72AA servo motor is an MP series low-inertia rotary servo motor manufactured by Allen-Bradley. Its power rating is 2.1 kilowatts, 460 Volts AC input voltage, and 7 Amps of continuous tall currents. Its frame size is 130 millimeters and it has a 3-inch magnetic stack length. The continuous stall torque of this motor is rated 8.25 N-m and its rotor inertia is rated at 0.00040 kg-m2. The MPL-B4530F-SK72AA servo motor uses a single-turn high-resolution encoder to process speed feedback and its high quality winding insulation provides optimal thermal management.

The cutting-edge winding technology of the MPL-B4530F-SK72AA servo motor enables it to produce up to 40% better torque performance than traditional servo motors. This motor is compatible with Allen-Bradley Kinetix servo drives and it features a circular DIN, right angle, 180 degrees rotatable cable connectors. Its smart motor technology reduces the length of time required to configure the motor during its installation and its mounting pilot ensures correct motor to machine alignment. The environmental protection rating of the MPL-B4530F-SK72AA servo motor is IP 50. It has no factory installed shaft seal kit or shaft key. It does not feature a brake kit but it supports the use of external holding/stopping brake mechanisms. A shaft seal must be installed on this motor if it is going to be operated in environments where it has direct contact with liquids or debris that can enter its bearing. Stray signals from other machinery can affect the performance of the MPL-B4530F-SK72AA servo motor but this can be prevented by isolating the power transformers, separating the power cables from the communication cables, or installing the AC line filters.