Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley MPL Servo Motors MPL-B4530K-RK22AA

Product image is representative; revision or series may vary. Contact us to request a specific version.

MPL-B4530K-RK22AA

|
Need a Specific Revision?

The product code MPL-B4530K-RK22AA is used for an Allen-Bradley/Rockwell Automation rotary servo motor with a voltage class rating of 400 Volts and a rated rotor speed of 4000 revolutions per minute. The motor has a high output rating and a reduced motor size with a frame size of 130 millimeters. This motor is part of the MPL servo motor series.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for MPL-B4530K-RK22AA

ManufacturerAllen Bradley
CategoryMotors
Product LineMPL Servo Motors
Part NumberMPL-B4530K-RK22AA
Weight16.63 lbs (7.54 kg)
Motor TypePremium Permanent-Magnet Rotary Servo Motor
Inertia TypeLow Inertia
Voltage Class400 Volts
Frame Size (IEC 72-1 Flange Number)130 millimeters
Magnet Stack Length3 Inches
Rated Speed4000 revolutions per minute
Feedback2-Pole Resolver
Shaft Key/SealNo Shaft Key, No Shaft Seal
ConnectorsCircular Bayonet, Facing Shaft
BrakeNone
Mounting FlangeIEC Metric
Factory Designated OptionsStandard
Request a Repair

The catalog number MPL-B4530K-RK22AA is reserved for an Allen-Bradley/Rockwell Automation MPL series servo motor that provides advanced acceleration due to its high-energy rare-earth magnets and a high torque to size ratio thanks to the use of exceptional winding technology. The MPL-B4530K-RK22AA servo motor has standard IEC 72-1 mounting dimensions and it includes all the necessary mounting accessories for easy and immediate installation. The setup and installation processes for the motor are straightforward and they do not require any non-standard tools or equipment. The typical operating temperature range of a motor like the MPL-B4530K-RK22AA servo motor is from 0 to 40 degrees Celsius (32 to 104 degrees Fahrenheit). The place where the motor is stored should have an ambient temperature between -30 and 70 degrees Celsius (-22 and 158 degrees Fahrenheit). The storage atmosphere must also be non-corrosive and the relative humidity level should be between 5 and 95% (non-condensing).

Since optional protective elements like a shaft seal are not installed on it by default, the Allen-Bradley/Rockwell Automation MPL-B4530K-RK22AA MPL series low inertia servo motor has an environmental protection rating of IP 50. The low-inertia premium motors from the MPL series like the MPL-B4530K-RK22AA servo motor can have environmental protection ratings of up to IP 66 if an optional shaft seal is installed on their shafts. Note that the shaft seal tends to wear out quickly and that it must be replaced regularly to protect the motor shaft as thoroughly as possible. The optional shaft seal provides protection from water and other liquids and from dust, dirt, and particles. The voltage class of the MPL-B4530K-RK22AA servo motor is 400 Volts. This motor features a maximum operating speed of 4000 revolutions per minute and it is enhanced with an optional feedback device. The feedback device is a 2-pole resolver.