Free UPS Ground on All Orders!
+1 (919) 205-4392
Allen Bradley MPL Servo Motors MPL-B4530K-RK24AA

Product image is representative; revision or series may vary. Contact us to request a specific version.

MPL-B4530K-RK24AA

|

The MPL-B4530K-RK24AA motor is a servo motor manufactured by Allen-Bradley/Rockwell Automation. This MPL series servo motor is part of the series’ 400 Volts voltage category and it includes a 24 Volts DC brake. The rated speed of the MPL-B4530K-RK24AA servo motor is 4000 revolutions per minute and its feedback option is a 2-pole resolver.

Call for an immediate quote
2 Year DO Supply Warranty
Available
Ships from Raleigh, NC
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for MPL-B4530K-RK24AA

ManufacturerAllen Bradley
CategoryMotors
Product LineMPL Servo Motors
Part NumberMPL-B4530K-RK24AA
Weight15.00 lbs (6.80 kg)
Motor TypePremium Permanent-Magnet Rotary Servo Motor
Inertia TypeLow Inertia
Voltage Class400 Volts
Frame Size (IEC 72-1 Flange Number)130 Millimeters
Magnet Stack Length3 Inches
Rated Speed4000 Revolutions per Minute
Feedback2-Pole Resolver
Shaft Key/SealNo Shaft Key, No Shaft Seal
ConnectorsCircular Bayonet, Facing Shaft
Brake24 Volts DC Brake
Mounting FlangeIEC Metric
Factory Designated OptionsStandard

The servo motor with the product code MPL-B4530K-RK24AA has been designed and manufactured by Allen-Bradley/Rockwell Automation. The MPL-B4530K-RK24AA servo motor is a permanent magnet type of servo motor that is available through the Allen-Bradley MPL servo motor series and it features “smart motor technology” that provides an on-board memory module that retains identity of the motor and allows for the automatic reporting of the motor identity to the system through the communication link. These automatic reports are done during the startup of the system, thus significantly reducing the time needed for commissioning. The MPL-B4530K-RK24AA servo motor supports an operational speed of up to 4000 revolutions per minute and it is a member of the 400 Volts voltage category in the MPL series.

The Allen-Bradley/Rockwell Automation MPL-B4530K-RK24AA MPL series servo motor has a magnet stack length of 3 inches along with a frame with a size of 130 millimeters or 5.1 inches. This servo motor includes a 2-pole resolver device for feedback and a 24 Volts DC holding brake. The MPL-B4530K-RK24AA servo motor is equipped with a circular bayonet connector that faces the motor shaft and an IEC metric flange for mounting purposes. It can use standard cables and cables that support continuous flex. The lengths of the supported cables range from 1 to 90 meters. The MPL-B4530K-RK24AA servo motor is compatible with accessories like motor-end connector kits and shaft seal kits. This motor does not come with a shaft seal, but if an optional shaft seal is installed, the motor’s protection rating increases from IP 50 to IP 66.