MPL-B4530K-SJ22AA

The MPL-B4530K-SJ22AA servo motor is a brushless servo motor designed and manufactured by Allen-Bradley. The servo motor has a rated input voltage of 400 Volts AC and a 130-millimeter frame size. The MPL-B4530K-SJ22AA servo motor has a speed of 3000 revolutions per minute. The motor belongs to the MPL series of servo motors from Allen-Bradley. Servo motors in this family have a small size, but the size does not hinder the motors from delivering high performance in a demanding environment. The MPL-B4530K-SJ22AA servo motor, as with other servo motors in the same family, allows for the changing of the connector’s orientation. Opening up the motor for maintenance must only be performed by authorized Allen-Bradley repair technicians. The MPL-B4530K-SJ22AA servo motor, like other servo motors in the same family, has a high torque to size ratio and low rotor inertia. The servo motor has no brake.

For connections, the MPL-B4530K-SJ22AA servo motor contains circular bayonet connectors which face the shaft. The motor contains a shaft key, but it has no shaft seal. Without a shaft seal, the MPL-B4530K-SJ22AA servo motor has an IP 50 environmental protection rating. However, note that even though the motor is supplied without a shaft seal, a shaft seal can be installed if necessary. With a shaft seal, the environmental protection rating changes to IP 66. However, a shaft seal must be accompanied by sealed cable connectors so that an IP 66 protection rating can be achieved and maintained. Before applying a load on the motor’s shaft, the axial and radial shaft loads must be calculated so that they do not exceed those allowed by Allen-Bradley.